ZOTAC ZBOX QCM7T3000 handleiding
Handleiding
Je bekijkt pagina 3 van 57
2
quick start guide
INSTALLING HARD DISKS/SSD
1. Locate the 2.5-inch SATA hard disk/SSD
and the hard disk bracket.
2. Install the hard disk/SSD to the hard disk
bracket.
3. Insert the hard disk bracket into the
SATA slot.
4. Reinstall the thumb screw.
PACKAGE CONTENTS
CUSTOMIZING YOUR ZOTAC ZBOX
INSTALLING MEMORY MODULES
• 1 x ZOTAC ZBOX
• 1 x AC Adapter
• 1 x Power Cord
• 1 x Warranty Card
• 1 x User Manual
• 1 x Windows Driver DVD (optional)
• 1 x USB flash drive with Windows drivers
• 2 x Antenna
1. Lay the ZOTAC ZBOX on a flat surface with
the rubber feet facing upwards.
2. Locate the two thumb screws and remove.
3. Slide the cover o the ZOTAC ZBOX in the
direction of the arrow.
1. Locate the SO-DIMM memory slots and
insert a SO-DIMM memory module into the
slot at a 45 degree angle.
2. Gently press down on the memory module
until it locks into place by the arms of the
memory slot.
1
2
1
2
3
4
1
2
3
Bekijk gratis de handleiding van ZOTAC ZBOX QCM7T3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ZOTAC |
| Model | ZBOX QCM7T3000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13017 MB |
