Zoom GM-200 handleiding
Handleiding
Je bekijkt pagina 6 van 12
To use the GM-200 for creating various types of sound, perform the following steps.
ZOOM GM-200
Trying Out the GM-200
Trying Out the GM-200
6
Use the GAIN control to adjust the distortion
intensity. Because turning up this control not only
increases distortion but also raises the volume level,
use the MASTER LEVEL control as necessary to
adjust the level.
Adjust distortion intensity and
volume
Adjust ZNR (Zoom Noise Reduction)
3.
Use the OUTPUT CHARACTER knob to choose
among the various options, as described on page
8. Make the setting to match the type of system to
which the GM-200 is connected.
Select the output character
1.
Use the AMP SELECT knob to choose the guitar
amplifier type that is simulated by the unit, as
listed on page 9.
Select the amp type
2.
4.
Use the ZNR control to set the threshold for the ZNR circuit that reduces noise
during play pauses. When the control is turned fully to the left, ZNR is off.
Turning the control to the right gradually raises the action threshold. Set the
control to achieve maximum noise reduction without causing the sound to be
cut off unnaturally.
NOTE
The optimum ZNR point will differ for various amp
types and gain settings. Readjust the ZNR control if
you have changed the setting of the AMP SELECT
knob or the GAIN control.
Bekijk gratis de handleiding van Zoom GM-200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zoom |
| Model | GM-200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2167 MB |
