Zodiac Vortex-Pro VX40 handleiding
Handleiding
Je bekijkt pagina 9 van 24
Whenthecontrolboxispoweredonwiththeoating
cable attached, the operating time for the current
selected cycle is displayed.
The robotic cleaner includes a safety feature that
automatically stops the cleaner if it is powered on but
not submerged in water. For pools equipped with a
beach area, this safety feature is programmed to drive
the cleaner in reverse and back into the pool when the
impeller is out of the water.
4.1 Submerging the Cleaner
1. Submerge the cleaner in the pool and remove
any air trapped inside by keeping the unit
vertical (Figure 15).
1
Figure 15. Submerge the Cleaner Vertically
2. Ensure the unit sinks to the bottom of the pool
anddoesnotoat(Figure16).
2
Figure 16. Cleaner Sinking to the Bottom of the
Pool
3. Spreadouttheoatingcableoverthepool,
ensuring there are no kinks or coils in the cable
(Figure 17).
Figure 17. Spread Floating Cable Over the Pool
9
H0516700_REV A
Bekijk gratis de handleiding van Zodiac Vortex-Pro VX40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | Vortex-Pro VX40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4454 MB |
