Zodiac PM40 handleiding
Handleiding
Je bekijkt pagina 8 van 31

28
❶ Installaon
1.1 I Selecng the locaon
• The appliance must be installed at least 2 metres from the pool's edges.
• Do not li the appliance by the body; use its base.
• Installaon is only permied outdoors: provide for a clear space around the appliance as shown in the diagram under
§ "1.2 I Hydraulic connecons".
• Place the appliance on its an-vibraon pads (supplied with the appliance, height adjustable) on a stable, solid and
level surface,
• This surface must be able to bear the weight (see § "5.2 I Technical specicaons") of the appliance (in parcular in
the case of installaon on a roof, a balcony or any other support).
: Front
: Rear
: An-vibraon pads
View of the appliance base from below for installing the an-vibraon pads
The appliance must not be installed:
• With the blowing towards a permanent or temporary obstacle (awning, brushwood, etc.) less than 4 metres away,
• Within range of water or mud jets, sprays or run-o (take the eect of the wind into account),
• Near a heat source or ammable gas,
• Near high-frequency equipment,
• In a locaon where it would be subject to snow build-up,
• In a locaon where it might be ooded by the condensates produced by the appliance when operang.
Tip: to reduce noise produced by your heat pump
• Do not install it under or facing a window.
• Do not lt it towards your neighbours.
• Install it in an open space (sound waves are reected on surfaces).
• Install an acousc screen around the heat pump, respecng the distances (see drawing § "1.2 I
Hydraulic connecons").
• Install 50 cm of exible PVC pipe at the heat pump water inlet and outlet to absorb vibraons.
EN
Bekijk gratis de handleiding van Zodiac PM40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Zodiac |
Model | PM40 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 8785 MB |