Zodiac Heat Line handleiding
Handleiding
Je bekijkt pagina 11 van 17
10
3.3 I Operaon
• Never run the circulang pump (depending on the model) without water. The circulang
pump is very quiet when it starts up; you may not hear it running.
• Never run water through the primary circuit when there is no water running through the
secondary circuit.
• The ow rate must be adjusted slowly to avoid hammering.
: Pool water inlet valve (secondary circuit)
: Pool water bypass valve (secondary circuit)
: Pool water outlet valve (secondary circuit)
: Heang water inlet valve (primary circuit)
: Heang water outlet valve (primary circuit)
• Check that the hydraulic connecons are correctly ghtened and that there are no leaks.
• Check that the appliance is stable.
• Posion the valves as follows: valves A and C fully open, valve B closed.
• Start the ltraon pump.
• Check that the pool water is owing through the exchanger,
• Open valves D and E fully,
• Check that the heang circuit is lled and vented,
• Connect the regulaon to the power supply and turn it on,
• Adjust the temperature setpoint..
• Aer the start-up steps for your exchanger:
- Check that there are no leaks,
- Check that the circulang pump stops working in case the setpoint temperature is reduced, the regulaon is
stopped or the ltraon is stopped.
- Check that the exchanger is no longer irrigated with water by the heang circuit when the ltraon is stopped and
that there are no pool water heang requests.
Tip: Tips: choosing the regulaon module for a Bare Heat Line
• It must reference the input temperature of the pool water in the appliance.
• It must give the command to irrigate the primary circuit only if heang is requested and ltraon is
operaonal,
• It must stop irrigang the primary circuit once the pool has reached the desired temperature.
Tip: Restarng the circulang pump aer a long shutdown period
• In the event of a blockage, an indicator lights up (see § « 5.2 I Error code display »). In this case, use a
screwdriver to manually release the blockage through the central hole provided in the circulang pump.
EN
Bekijk gratis de handleiding van Zodiac Heat Line, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | Heat Line |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3817 MB |
