Zodiac GenSalt OT handleiding
Handleiding
Je bekijkt pagina 42 van 60

40
"Slave" mode only controls chlorina on. The lter pump, accessories, ligh ng and other func ons remain valid.
A press of the key has priority over "Slave" mode.
If a Dual Link module is installed, the ORP func on is ignored by the "Slave" mode. pH regula on remains valid.
"LOW"/"COVER"/"BOOST" modes have priority over "Slave" mode.
Slave mode operates as follows: "contact closed = chlorina on ON/contact open = chlorina on
OFF".
5.2.13 Con guring the dura on of polarity reversal
The polarity reversal principle eliminates scale that has deposited on the electrodes by reversing the electrical power at
a speci ed me. By default, the cycle is reversed every 5 hours.
The hardness of the water varies depending on the geographical region concerned (water hardness = TH).
In order to protect the electrodes from scale build-up (which reduces the effi cacy of the electrolysis reac on), the
polarity reversal me can be adjusted.
• Before se ng the polarity reversal me, analyse the hardness (TH) of the pool water, see “4.1 I Balancing
the water”.
Water hardness (TH) Recommended polarity reversal me (hours)
< 15°f (150 mg/L or ppm) 6 - 8
15 - 30 °f (150 - 300 mg/L or ppm) 5
30 - 40 °f (300 - 400 mg/L or ppm) 3 - 4
> 40°f (400 mg/L or ppm) 2 - 3
• Press and browse the menu using the bu ons. Press to con rm.
• Select the polarity reversal me (can be set every 2 to 8 hours) using the
bu ons. Press
to con rm.
• Press to exit.
At the me of reversal, chlorina on is stopped for a few minutes. No message is displayed on the screen.
Normal opera on resumes a er reversal is complete.
Bekijk gratis de handleiding van Zodiac GenSalt OT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Zodiac |
Model | GenSalt OT |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 20621 MB |