Zodiac GenSalt OT handleiding
Handleiding
Je bekijkt pagina 17 van 60
15
2.5.4 External connecons: what products should be connected?
The chlorinator must be protected by a circuit breaker of the same type as that used for a lter pump (for
example a ltraon control panel).
If the chlorinator is powered by a ltraon control panel, the mers must be manually set to 24/7 mode. The
chlorinator manages all mers and must receive a connuous power supply.
12 - 24 V contact
230 V contact
RS485 cable (supplied
with the pump)
230 V power
supply
230 V power
supply
All types of auxiliary device
12 - 24 V
All types of auxiliary
device
230 V
FloPro™ VS
All lter pump models
Heang (heat pump, heat
exchanger, electric heater),
booster pump, etc.
maximum 8 A
Transformer for lighng,
booster pump, etc.
maximum 8 A
Variable-speed pump
maximum 8 A
Single-speed pump or
variable 3-speed pump of
type FloPro™ e3.
maximum 8 A
2.5.5 Connecng to a lter pump (depending on the model)
The chlorinator can power and control the lter pump.
In such a case, the chlorinator must be powered via an electrical protecon that is calibrated for a lter pump.
Possible controls:
- For a single-speed pump (SSP): ON/OFF with 2 mers,
- For a FloPro™ VS variable-speed pump (VSP): ON/OFF/RPM with 4 mers.
(see installaon manual for the Zodiac™
FloPro® VS lter pump)
RS485 Cable
(supplied with the pump)
Power supply
230 V
230 V power
supply
FloPro™ VS
All lter pump models
Variable-speed pump
maximum 8 A
Single-speed pump for
all models or compable
Zodiac® variable-speed
pump.
maximum 8 A
GREEN
YELLOW
BLACK
RED
RED
BLACK
YELLOW
GREEN
(Terminal block at the level of the FloPro™ VS pump)
EN
Bekijk gratis de handleiding van Zodiac GenSalt OT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | GenSalt OT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20621 MB |
