Zodiac GenPH handleiding

20 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 20
9
2.2.2 Sensor and injec on point installa on
There must be at least 60 linear cm between the sensor and the injec on point. If this is not possible, use
the POD kit available as an op on or a check valve.
Fixture collars (or the POD kit) must be installed on rigid Ø50 PVC pipes. A Ø63 adapter is available as an
op on.
The POD kit is recommended if a Redox (chlorine) regula on module has also been installed.
Maximum pressure must not exceed 1.5 bar.
Drill a hole with a diameter between 16 and 22 mm on the pipe at the selected loca ons for the pH sensor
and the injec on point.
Then install the  xture collars.
Use Tefl on tape to make sure the threads on the sensor holder, the injec on valve and its adapter are
water ght.
Screw down the one or more sensor holders onto the  xture collar or a POD kit (op onal), see illustra� on
.
Carefully unscrew the protec on tube from the sensor, see illustra� on . Retain the protec� on tube for
use when the sensor is stored during the winter.
Rinse the end of the sensor with tap water and shake o excess water, see illustra� on .
Never wipe the sensor using a cloth or paper � ssue, as this may damage it!
A badly-installed sensor may give false readings and cause inappropriate opera� on of the
appliance. Neither the manufacturer nor the appliance shall be liable in this event.
Screw the sensor into the sensor holder, holding the BLUE connector in one hand and the black connector
in the other to avoid tangling the cable, see illustra� on
.
Once the sensor is installed, it can be connected to the BNC connector's control box, see "1.3 I Dimensions
and marking".
EN

Bekijk gratis de handleiding van Zodiac GenPH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkZodiac
ModelGenPH
CategorieNiet gecategoriseerd
TaalNederlands
Grootte5404 MB