Zodiac FreeRider FR1000 iQ handleiding
Handleiding
Je bekijkt pagina 16 van 26
Page 16
Zodiac
®
Freerider
™
iQ Cordless Robotic Cleaner | Owner’s Manual
5. Use a pair of scissors to cut the tabs 3/4 inch
from the heel so that they are no higher than
the cleaning blade.
6. Repeat the procedure to install the second
brush.
Figure 27. Cut Tabs
6.5 Replacing Tracks
1. Pull on the inside of the old track to remove
the track lip from the front wheel.
Figure 28. Pull the Old Track Over the Wheel
2. Remove the old track from the front wheel,
then remove track from the rear wheel.
Figure 29. Remove the Old Track
3. Replace the track on the wheel by positioning
the rib toward the body of the cleaner.
Figure 30. Track Replacement Orientation
4. Push one side of the track on to the wheel
and fit the rib of the track in the groove of the
wheel.
Figure 31. Start on One Side of the Track
5. Work the track onto the front wheel and verify
the rib of the track is positioned properly
within the groove of the wheel.
Figure 32. Work the Track On Around the Wheel
Bekijk gratis de handleiding van Zodiac FreeRider FR1000 iQ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | FreeRider FR1000 iQ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3424 MB |
