Zodiac FreeRider FR1000 iQ handleiding
Handleiding
Je bekijkt pagina 15 van 26
Page 15
Zodiac
®
Freerider
™
iQ Cordless Robotic Cleaner | Owner’s Manual
6.4 Replacing Wear Parts
6.4.1 Replacing Brushes
The cleaner is fitted with PVC brushes with a
“wear” indicator.
Raised groove
becomes partially
flattened,
indicating
excessive wear
Figure 22. Worn Brush Indicator
To maintain cleaner performance at its best you
need to replace the brushes as soon as one of the
wear indicators is reached (even if the blade wear
is not even). It is recommended that you replace
the brushes when the rubber is worn down to
the top of the wear indicator (or every two years,
whichever comes first).
To replace a worn brush:
1. Lift the cleaner to a vertical position so that the
handle is up.
1
Figure 23. Cleaner in Upright Position
2. Separate the edges of the brush and undo the
tabs. Remove the worn brushes.
2
Figure 24. Undo the Tabs of the Brush
3. To install the new brush, position the new
brush on the roller with the cleaning blades
facing away from the roller.
3
Figure 25. Install the New Brush
4. Thread each tab into the slot provided and
gently feed it through until the heel comes out
at the other side of the slot.
4
Figure 26. Pull Tabs Through Each Slot
Bekijk gratis de handleiding van Zodiac FreeRider FR1000 iQ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | FreeRider FR1000 iQ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3424 MB |
