Zodiac eXPERT handleiding
Handleiding
Je bekijkt pagina 9 van 43
8
2.1.2. Connecng the cell and the sensor holder
• Do not glue sensor holder and cell directly together : use a PVC union coupler (not included) between
sensor holder and cell.
It is also possible to use a 6-to-8 cm PVC tube, Ø63 cm, with one beveled end (the one to glue to the cell
inlet) and a PVC sleeve (to glue between the PVC tube and the sensor holder).
For connecng the cell and the sensor holder :
• Degrease the sensor holder, the cell inlet and the PVC union with PVC cleaner (not supplied).
• Glue the sensor holder and the female union and t them into each other as far as it will go. Remove any excess glue
with a damp cloth.
• Glue the cell inlet and the male union and t them into each other as far as it will go. Remove any excess glue with a
damp cloth.
PVC union
coupler
PVC sleeve
PVC pipe (ed
into the cell)
Connecng the cell and the sensor holder
2.1.3. Connecng the cell to the control box
• Open the cell protecve cap by turning it an-clockwise.
• Idenfy the funcon of each wire (red, yellow, orange) in the power cable.
Cable colour Funcon
Red Electrolysis
Red Electrolysis
Yellow AUX / Conducvity
Orange Temperature
EN
Bekijk gratis de handleiding van Zodiac eXPERT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | eXPERT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14801 MB |
