Zipper ZI-HB254N handleiding
Handleiding
Je bekijkt pagina 37 van 44
TROUBLESHOOTING
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at 37
ZI-HB204N | ZI-HB254N
17 TROUBLESHOOTING
WARNING
Danger due to electrical voltage!
Handling the machine with connected power supply may result in serious injury or
death.
Always disconnect the machine from the power supply before maintenance or repair
work and secure it against unintentional reconnection.
Many possible sources of error can be excluded in advance if the machine is properly connected to
the power supply. If you are unable to carry out necessary repairs properly and/or do not have the re-
quired training, always consult a specialist to correct the problem.
Problem Possible cause Solution
Machine does not start or shuts
down automatically during idling
Power supply outage
Damaged or incorrect con-
nected extension cable
Damaged switch or motor
Switching pins of dust collector
hood
Check fuse of the power supply
Check plug or extension cable
Contact customer support
Plug in the switching pins cor-
rectly
Machine stops during operation Blunt blade
Feeding speed to high
Motor protection triggered
Check blade
Work with lower feeding speed
Let the motor cool down
Machine vibrates during opera-
tion
Wrong adjusted blade
Ground not flat or base feet
wrong adjusted
Check the setting of the blades
Set the base feet correct
Workpiece clamps during
thicknessing
Cutting depth to high
Dirty thicknessing table
Set the correct cutting depth
and operate in more steps
Clean and apply the table sur-
face with lubricant
Bad surface condition after oper-
ating
Blunt blade
Uneven feed of the workpiece
Check blade
Feed workpiece evenly and
with constant pressure
Rough surface after operating Workpiece too moist Use drier workpiece
Cracked surface after operating Workpiece was processed
against the direction of growth
Cutting depth to high
Proceed the workpiece in op-
posite direction
Set the correct cutting depth
and operate in more steps
Bekijk gratis de handleiding van Zipper ZI-HB254N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zipper |
| Model | ZI-HB254N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11297 MB |
