Zipper ZI-HB254N handleiding
Handleiding
Je bekijkt pagina 25 van 44
SAFETY
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at 25
ZI-HB204N | ZI-HB254N
12.3 Safety devices
The machine is equipped with following safety devices:
Blade guard (covering blade shaft)
• Separating protective device (fixed)
V-Belt / chain-drive guard
• Separating protective device (fixed)
Dust collector hood with switching
pins
• Moveable guard with safety switch for monitoring. The
machine can only be switched on if switching pins are
plugged in correctly
Anti-kick-back device
• The anti-kickback device prevent the workpiece from
kicking back
Overload protection
• The overload protection is activated if the machine is
overloaded. Allow the machine to cool down and then
press the overload switch to restart the machine.
12.4 General safety instructions
To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points in particular must be observed:
• Before connecting the machine to the main power supply, make sure all the safety items
are in the working position and check their working conditions, if necessary, to remove the
door or protective cover, cut off the main switch and lock it and cut off the power supply.
• Choose a level, vibration-free, non-slip surface for the installation location.
• Ensure sufficient space around the machine!
• Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects!
• Ensure a clean working environment!
• Only use perfect tools that are free of cracks and other defects (e.g. deformations).
• Remove adjustment tools from the machine before switching it on.
• Keep the area around the machine free of obstacles (e.g. dust, chips, cut workpiece parts
etc.).
• Check the strength of the machine connections before each use.
• Never leave the running machine unattended. The machine must be stopped if it is unat-
tended.
• The machine may only be operated, maintained or repaired by persons who are familiar
with it and who have been informed of the dangers arising in the course of this work.
• Ensure that unauthorised persons maintain a safe distance from the machine and keep
children away from the machine.
• Wear suitable protective equipment (eye protection, dust mask, respiratory protection, ear
protection, gloves when handling tools) as well as close-fitting work protective clothing -
never loose clothing, ties, jewellery, etc. - danger of being drawn in!
• Hide long hair under hair protection.
• Do not remove any sections or other parts of the workpiece from the cutting area while the
machine is running!
• Always work with care and the necessary caution and never use excessive force.
• Do not overload the machine!
• Do not work on the machine if it is tired, not concentrated or under the influence of medi-
cation, alcohol or drugs!
• Do not use the machine in areas where vapours from paints, solvents or flammable liquids
represent a potential danger (danger of fire or explosion!).
• Do not smoke in the immediate vicinity of the machine (fire hazard)!
• Make sure that the main switch is in the "O" position before connecting the machine to the
power source.
• Ensure that the machine is earthed.
• Only use suitable extension cords.
• Always shut down the machine before carrying out any conversion, adjustment, measuring,
cleaning, maintenance or repair work and always disconnect it from the power supply for
maintenance or repair work. Before starting work on the machine, wait until all tools or ma-
chine parts have come to a complete standstill and secure the machine against unintentio-
nal restarting.
Bekijk gratis de handleiding van Zipper ZI-HB254N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zipper |
| Model | ZI-HB254N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11297 MB |
