Zipper ZI-HB254N handleiding
Handleiding
Je bekijkt pagina 24 van 44
SAFETY
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at 24
ZI-HB204N | ZI-HB254N
12 SAFETY
This section contains information and important notes on safe start-up and handling of the machine.
For your own safety, read these operating instructions carefully before putting the ma-
chine into operation. This will enable you to handle the machine safely and prevent
misunderstandings as well as personal injury and damage to property. In addition, ob-
serve the symbols and pictograms used on the machine as well as the safety and haz-
ard information!
12.1 Intended use of the machine
The machine is intended exclusively for the following activities:
The planning (wide and narrow side as well as chamfering of the edges of a workpiece) and thickness
planning of sawn timber within the specified machine limits.
NOTE
ZIPPER MASCHINEN GmbH assumes no responsibility or warranty for other activities
and any resulting property damage or injuries!
12.1.1 Technical Restrictions
The machine is intended for use under the following ambient conditions:
Relative humidity: max. 65 %
Temperature (for operation) +5° C to +40° C
Temperature (for storage and/or transport) -20° C to +55° C
12.1.2 Prohibited Use / Forseeable Misuse
- Operation of the machine without adequate physical and mental aptitude
- Operating the machine without knowledge of the operating instructions
- Changes in the design of the machine
- Operating the machine under explosive conditions
- Operating the machine in closed rooms without chip and dust extraction device (a normal
household vacuum cleaner is not suitable as an extraction device)
- Operating the machine outside the specified power range
- Remove the safety markings attached to the machine.
- Modify, circumvent or disable the safety devices of the machine.
- Machining of materials with dimensions outside the limits specified in this manual.
- Use of tools that do not meet the safety requirements of the standard for woodworking ma-
chine tools (EN847-1).
- Removal of the blade guard during planing.
- Synchronous planing
- Application work (workpiece only machined over a partial length)
- Planing of strongly curved workpieces
The prohibited/hazardous use or disregard of the information and instructions presented in this man-
ual will result in the voiding of all warranty and damage claims against ZIPPER Maschinen GmbH.
12.2 User requirements
The machine is designed to be operated by one person. The prerequisites for operating the machine
are physical and mental fitness as well as knowledge and understanding of the operating instruc-
tions. Persons who, due to their physical, sensory or mental capabilities, inexperience or lack of
knowledge, are unable to operate the machine safely must not use the machine without supervision
or instruction by a responsible person.
Basic knowledge of woodworking especially the correlation of material, tool, feed and speeds.
Please note that locally applicable laws and regulations determine the minimum age of the op-
erator and may restrict the use of this machine!
Work on electrical components or equipment may only be carried out by a qualified electrician
or under the guidance and supervision of a qualified electrician.
Put on your personal protective equipment before working on the machine.
Bekijk gratis de handleiding van Zipper ZI-HB254N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zipper |
| Model | ZI-HB254N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11297 MB |
