Zipper ZI-BSF1500 handleiding
Handleiding
Je bekijkt pagina 25 van 39
TRANSPORT
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 25
ZI-BSF1500
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends on you!
13 TRANSPORT
To manoeuvre the machine in the packaging, a pallet truck or forklift truck with the appropriate
lifting force and a fork length of at least 1200 mm can be used, for example. The specifications can
be found in the chapter Technical data. To ensure proper transport, follow the instructions and
information on the transport packaging regarding the center of gravity, lifting points, weight,
means of transport to be used and prescribed transport position, etc. Ensure that the selected
lifting equipment (crane, forklift, lift truck, load slinging equipment, etc.) is in perfect condition.
The machine may only be lifted and transported by qualified personnel with appropriate training
for the lifting equipment used.
• To lift the machine, attach the lifting gear to the lifting
points (1).
• For longer transport, attach the machine to the handle
provided (2).
14 ASSEMBLY
14.1 Preparation
14.1.1 Check delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage must
also be noted immediately on the delivery note in accordance with the provisions of the warranty,
otherwise the goods are deemed to have been properly accepted.
14.2 Assemble
The machine comes pre-assembled, it is necessary to assemble the components dismantled for
transport according to the following instructions and to make the electrical connection.
1. Mount tyres
• Fasten both wheels (1) (left and right side) to the axle
using hexagon bolts M8×20 (2) with washers and lock
nuts M8 (3).
2. Install the lower steering device
• Place the lower steering device (3) on the back of the
machine base and mount it to the machine base using
the provided holes.
WARNING
Risk of injury from suspended or unsecured load!
Damaged or insufficiently strong hoists and load slings can result in serious injury or
even death.
Before use, therefore, check hoists and load slings for adequate load-bearing
capacity and perfect condition. Secure the loads carefully. Never stand under
suspended loads!
Bekijk gratis de handleiding van Zipper ZI-BSF1500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zipper |
| Model | ZI-BSF1500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9827 MB |
