Zipper ZI-ASA550B handleiding
Handleiding
Je bekijkt pagina 20 van 32
TRANSPORT
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 20
ZI-ASA550B
CAUTION
A safety instruction designed in this way indicates a possibly hazardous situation
which, if not avoided, may result in minor or moderate injury.
NOTE
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends on you!
13 TRANSPORT
For proper transport, observe the instructions and information on the transport packaging
regarding centre of gravity, attachment points, weight, means of transport to be used as well as
the prescribed transport position, etc. Transport the machine in its packaging to the installation
site. Pay attention to the correct body posture when lifting, carrying and setting down the load.
Lifting / setting down
- Establish stability when lifting / setting down (legs hip-width).
- Lift/set down load with knees bent and back straight (like weightlifters).
- Do not lift/set down the load in a jerky manner.
Carry
- Carry the load with both hands as close to the body as possible.
- Carry the load with a straight back.
When transporting the assembled machine, make sure to lift it only by the machine body and not
by the attachments.
If you transport the machine with a vehicle, ensure that the load is secured appropriately!
14 ASSEMBLY
14.1 Preparation
14.1.1 Check delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage must
also be noted immediately on the delivery note in accordance with the provisions of the warranty,
otherwise the goods are deemed to have been properly accepted.
14.1.2 Requirements for the installation site
The chosen installation site must ensure a suitable connection to the power supply. Place the
machine on a level, solid surface. The machine's installation site must comply with local safety
regulations and meet the ergonomic requirements for a workplace with adequate lighting
conditions.
14.2 Assemble
The machine comes pre-assembled, it is necessary to assemble the components dismantled for
transport according to the following instructions and to make the electrical connection.
Bekijk gratis de handleiding van Zipper ZI-ASA550B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zipper |
| Model | ZI-ASA550B |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5809 MB |