Handleiding
Je bekijkt pagina 28 van 60
28
Refrigerator Freezer Drawers Use, Care, and Installation Guide
REFRIGERATOR
FREEZER DRAWERS
DUAL ZONE
PRESRV™
Troubleshooting
Possible Problem Possible Cause Solutions
The temperature of the
appliance is incorrect.
Not enough time for the unit to stabilize in
temperature.
The unit has a large temperature range.
Switching between dierent temperatures
or modes like Pantry and Freezer will take
a longer duration for the temperature to
stabilize.
The body of the
appliance is electrified.
The unit is not properly grounded.
Contact your local electrician to test your
electrical grounding system.
Frost is forming in the
appliance.
The environment is too humid.
The unit uses an ‘auto-defrost’ system,
under certain conditions, manual
defrosting may be required. If frost builds
up, you can try running the refrigerator on
a warmer temperature setting, minimizing
the number of times you open the drawer
or unplugging the unit to allow the frost to
melt.
The ambient temperature is too low.
The drawer is being opened too frequently.
The appliance makes too
much noise.
The rattling noise may come from the flow of
the refrigerant, which is normal. As each cycle
ends, you may hear gurgling sounds caused
by the flow of refrigerant in the appliance.
It is normal that as each cooling cycle
ends, you may hearing ratting or gurgling
sounds caused by the flow of refrigerant
in the appliance. The high eciency
compressor may make a pulsating or high
pitched sound.
Contraction and expansion of the inside walls
may cause popping and cracking noises.
Some popping or cracking noises are
normal. They are caused by expansion
and contraction of the inside walls due to
temperature changes.
The unit is not level or is touching another
appliance.
Check to make sure the cooler is level
and that it is non in contact with another
appliance or furniture.
The drawer will not close
properly.
The appliance is not level.
Make sure the appliance is on a level
surface.
The drawer gasket is not installed correctly.
Make sure the drawer gasket is properly
installed.
The gasket is dirty. Clean the drawer gasket.
The shelves are out of position. Install the shelves correctly.
The interior of the
appliance is covered with
dust or soot.
The unit is located nearby a fireplace,
chimney, candle, or another fire source.
Make sure the unit has adequate distance
away from those fire sources.
Freezer preset
temperature mode is not
freezing the foods.
Placing more unfrozen food into the drawers
than the unit is capable of freezing in a short
time span.
Storage time will vary depending on the
quantity of food and type of packaging
used. The freezer preset temperature mode
will not quick freeze a large quantity of
food. Place roughly 2 to 3 pounds of food
per cubic foot of freezer space. There needs
to be space in the freezer for the cold air to
circulate.
The food is too hot upon placing them inside
the unit.
Allow hot foods to cool before packaging
and freezing.
Bekijk gratis de handleiding van Zephyr Presrv PRRFD24C2AS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zephyr |
| Model | Presrv PRRFD24C2AS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6325 MB |