Handleiding
Je bekijkt pagina 27 van 60
27
Refrigerator Freezer Drawers Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Troubleshooting
Possible Problem Possible Cause Solutions
The appliance does not
operate.
Not plugged in.
Ensure the appliance is plugged in and the
power outlet has power.
The appliance is turned o. Turn on the appliance.
The circuit breaker tripped or has a blown
fuse.
Replace the broken fuse or reset the
breaker.
Sabbath mode may be enabled.
See the Operating Your Appliance section
and verify if Sabbath mode is disabled.
The appliance is not cold
enough.
Temperature control setting is too high. Adjust the set temperature.
External environment may require a higher
setting.
Keep the appliance away from sunshine or
other heat sources.
The drawer is opened too frequently or for
long periods of time.
Close the drawer tightly and do not open
the drawer too frequently or for a long
period of time.
The drawer gasket is not sealed properly. Ensure the drawer gasket is not loose.
Demonstration mode may be enabled.
See the Operating Your Appliance section
and verify if Demonstration mode is
disabled.
The unit does not have sucient ventilation.
Read and follow the “Installation
Clearance Requirements” in the Installation
Instructions section.
The cooler has restricted air flow due to too
much storage.
Open space in the cabinet to allow air flow.
The unit was recently installed.
It may take a few hours for each zone to
reach the desired temperature.
The unit was recently relocated.
If the unit was stored on its side, shift the
unit to stand upright for 24 hours before
powering on. If it was stored for a long
period of time, it will take time for the unit
to reach set temperatures.
Incorrect preset temperature setting.
Make sure the correct preset temperature
setting is selected. Pantry mode would be a
lot warmer than Freezer mode.
The appliance turns on
and o frequently.
The unit was recently plugged in or power was
recently restored.
The unit may take up to 24 hours to reach
set temperature.
The room temperature is hotter than normal.
Run the refrigerator at the appropriate
ambient temperature.
The drawer gasket is not sealed properly. Ensure the drawer gasket is not loose.
The drawer is opened too frequently or for
long periods of time.
Close the drawer tightly and do not open
the drawer too frequently or for a long
period of time.
The unit does not have sucient ventilation.
Read and follow the “Installation
Clearance Requirements” in the Installation
Instructions section.
The drawer is not closed completely. Make sure the drawer is completely closed.
Bekijk gratis de handleiding van Zephyr Presrv PRRFD24C2AS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zephyr |
| Model | Presrv PRRFD24C2AS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6325 MB |