Zelmer ZCF5601 handleiding
Handleiding
Je bekijkt pagina 13 van 76
13
PL
EN
• This appliance is for indoor use only except moist or wet room.
• Before pushing the reversible slide switch, it is necessary to stop the action of the blades by turning o the fan.
• The supplier disclaims all liability for personal injury or property damage arising from incorrect use or installation
of the fan. In doubt, call upon an electrician.
• Be careful when working near the rotating blades.
• Warning: only to be installed outside arms reach.
• The product should be installed by an authorized electrician in accordance to national wiring rules.
• An all-pole disconnector with isolating distance of 3mm must be incorporated in the xed wiring in accordance
with the national wiring rules.
• The inner wires can´t touch the white metal enclosure after assembling by the client.
TURN POWER OFF
Begin installation by removing fuses or turning o circuit breakers to the wiring you will be using.
WARNING: Failure to disconnect the power supply prior to installation may result in serious injury or death.
Install the appliance ONLY for at ceilings DO NOT use with sloped or vaulted ceilings.
In locations without a ceiling joist, a hanger support bar may be required. Do not install in damp locations.
B&B TRENDS, S.L. will not be held liable for any harm or damage which may occur to people, animals or objects
as a result of failure to observe the aforementioned warnings.
PRE-INSTALLATION INSTRUCTIONS
Before installing this product, read the package list in previous pages and ensure all parts are present and display
no defects. DO NOT attempt to install the product if any part is missing or damaged. Read the safety information
before installation or use.
Additional tools required for assembly:
• Cross-head Screwdriver
• Flat Head Screwdriver
• Adjustable Pliers or Wrench
• Step Ladder
• Wire Stripper
• Impact Drill (For Cement Floors)
• Electrical Tape
• Safety Glasses
Additional helpful tools:
AC/DC tester light, tape measure, wiring handbook, and wire cutters, hammer.
WARNING: NEVER bend the blade brackets/anges during assembly or after installation.
DESCRIPTION
Unpack your fan and check the contents. Do not discard the carton. If replacement or repair is ever necessary the
fan should be returned in original packaging. Remove all parts and hardware. Do not lay motor housing on its side:
the decorative casting may shift.
Examine all parts. You should have the following:
1. Mounting bracket
2. Ceiling drop rod (15cm and 25 cm). Use the rod that suits you best to x the fan closer to or further away from
the ceiling.
3. Yoke cover
Bekijk gratis de handleiding van Zelmer ZCF5601, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zelmer |
| Model | ZCF5601 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 5869 MB |
