Zelmer Tomek ZVC704 handleiding
Handleiding
Je bekijkt pagina 11 van 60
11
PL
EN
FILTER REPLACEMENT
Before changing the lters make sure that the vacuum cleaner is switched off and unplugged from the
mains supply.
INLET FILTER
The inlet lter should be removed and rinsed once a year, and can use it after dry. If the lter is damaged
it should be replaced.
1. Pull the end of the suction hose (8) out of the vacuum cleaner’s inlet opening by pressing the buttons
on it.
2. Press front cover lock button (2) and open the front cover (3) by clipping.
3. Take out the dust bag holder (20) with dust bag (19).
4. Remove the frame with inlet lter (18) out of the vacuum cleaner housing.
5. Replace lter with a new one, paying attention that the outer edge of the lter is placed inside the safety
ribs of the frame.
6. Put the lter frame (18) and bag holder (20) with dust bag (19) back into the vacuum cleaner and close
the front cover (3).
OUTLET FILTER
The vacuum cleaner is equipped with an HEPA lter that should be replaced approximately every 6 months,
depending on the frequency of use of the device.
1. Press outlet HEPA outlet lter cover latch (14), lift the cover and remove it.
2. Replace outlet HEPA lter (16) with new one.
3. Put back lter cover and close it.
CLEANING OF MINI TURBOBRUSH
During use, hair and threads can accumulate on the revolving brush of the mini turbo brush (25*). These
must be removed in order for the appliance to work effectively.
1. Before cleaning, disconnect the brush from the vacuum cleaner.
2. Hair and threads can be removed by cutting them with scissors along groove in the revolving brush shaft.
CLEANING OF TURBOBRUSH
During use, hair and threads can accumulate on the revolving brush of the turbo brush (26**). These must
be removed in order for the appliance to work effectively.
1. Before cleaning, disconnect the brush from the vacuum cleaner.
2. Hairs and threads can be removed by cutting them with scissors along the axis of the revolving brush
shaft.
3. If more thorough cleaning is necessary or if something is stuck in the brush, you can open the cover
located on the bottom of the brush. This allows easy access to the turbine inside the brush.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and electronic devices,
known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework
applicable in the European Union for the disposal and reuse of waste electronic and electrical
devices. Do not dispose of this product in the bin, instead going to the electrical and electronic
waste collection centre closest to your home
Bekijk gratis de handleiding van Zelmer Tomek ZVC704, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zelmer |
| Model | Tomek ZVC704 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5393 MB |
