Zelmer Tomek ZVC704 handleiding
Handleiding
Je bekijkt pagina 10 van 60
10
PL
EN
• Parquet brush (24*): Dedicated to clean hard, scratch sensitive surfaces such as wooden oors, oor
panels, parquet, marble, tiles, etc. Soft bristles ensure maximum vacuum effectiveness and protects
against scratching of the cleaned surface.
• Mini turbobrush (25*): Use it to vacuum upholstered furniture and car upholstery of hair, pet hair and ne
dust. It can also be used to clean carpets. Hair and threads can accumulate on the revolving brush during
use. These must be removed in order for the appliance to operate effectively. See section „CLEANING OF
MINI TURBOBRUSH” for more details.
• Turbobrush (26*): Use it to vacuum carpets. Hair and threads can accumulate on the revolving brush during
use. These must be removed in order for the appliance to operate effectively. See section „CLEANING OF
TURBOBRUSH” for more details.
VACUUM CLEANER OPERATION
1. Insert the end of the suction hose (8) into the inlet opening and press it lightly until it clicks into place.
2. Attach the suction hose handle (9) to the metal telescopic tube (11).
3. Attach the appropriate nozzle or brush to the other end of the metal telescopic tube.
4. Adjust the length of the telescopic suction tube by holding the suction hose handle (9) with one hand and
moving the telescopic tube handle (10) in the desired direction with the other hand.
5. Use 2in1 universal brush (12) for vacuuming both hard surfaces and carpets. To clean hard surfaces –
wooden oors, plastic oors, ceramic tiles etc. pull out the brush by pressing the switch (set the switch to
the „parquet” position
). Retract the brush when vacuuming carpets (set the switch to the „carpet”
position ).
6. The vacuum cleaner is equipped with an accessory compartment (15). It can be used to store the 2in1
crevice nozzle (23).
7. Pull the plug and cord (17) out of the vacuum cleaner.
8. Plug the vacuum cleaner into the socket.
Before operation make sure that the dust bag (19) is installed in the vacuum cleaner chamber and that inlet
lter (18) and the outlet HEPA lter (16) is installed in the appliance.
9. Switch on the vacuum cleaner by pressing the ON/OFF button (6).
10. The vacuum cleaner is equipped with electronic power regulator. The power regulation is performed
with a knob. Moving the knob according to the markings (MAX or MIN) will increase or reduce the suction
power.
DUST BAG REPLACEMENT
When the dust bag full indicator (4) turns fully red while appliance is turned on and brush or nozzle is raised
above the cleaned surface, it indicates that the dust bag needs to be replaced with a new one.
It is recommended to replace the dust bag also if the safety valve activates (a characteristic “whirr” sound
can be heard inside the vacuum cleaner) or the vacuum cleaner operates poorly.
Do not start cleaning without an installed bag.
1. Switch off the vacuum cleaner by pressing the ON/OFF button (6).
2. Unplug the appliance.
3. Pull the end of the suction hose (8) out of the vacuum cleaner’s inlet opening by pressing the buttons
on it.
4. Press front cover lock button (2) and open the front cover (3) by clipping.
5. Take out the dust bag holder (20) and remove the dust bag (19).
6. Place the new dust bag (19) in the dust bag holder (20) and insert it back into the vacuum cleaner.
7. Close the front cover (3) until you hear the characteristic clicking sound – be careful not to catch the bag.
Set of replacement bags suitable for this vacuum cleaner: ZVCA110B
Bekijk gratis de handleiding van Zelmer Tomek ZVC704, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zelmer |
| Model | Tomek ZVC704 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5393 MB |
