Handleiding
Je bekijkt pagina 12 van 68
12
PL
EN
Hand blender with chopper user manual
1. Preparing ingredients – Cut larger vegetables, fruits or other products into smaller pieces to make chopping
easier and avoid overloading the blades.
2. Assembling the accessory – Place the container on a stable surface, attach the blades to the pin in the container,
place the ingredients in the container and then put on the lid.
3. Connecting the blender – Attach the main unit to the container lid, tting and pressing the latch mechanism
into the socket in the lid. Make sure it is securely fastened.
4. Using the device – Press the button to start the blender, controlling the operating time depending on the
desired consistency of the products (shorter shredding for larger pieces, longer for ner chopping).
Be careful. After nishing work, wait for the blades to stop completely.
5. Disassembly and cleaning – Unplug the blender, remove the main unit, carefully remove the blades and empty
the container. Wash the blades, container and lid under running water.
6. Storage – After drying all the elements, store the appliance in a dry place, preferably with the blades separated
from other accessories, for safety.
Accessory user instructions – dough hook mixers
1. Preparing the appliance – Before installing the hooks, make sure the hand blender is unplugged.
2. Installing the hooks – Insert the hooks into the appropriate holes in the adapter, making sure they are rmly
seated.
3. Preparing the ingredients – Place the our, water, yeast and other ingredients in a suitable container.
4. Starting the appliance – Turn the blender on at low speed, gradually increasing the power as you knead the
dough.
5. Controlling the kneading – Move the hooks around the bowl to mix the ingredients evenly. Avoid overloading
the appliance with too many ingredients so as not to strain the motor.
6. Finishing work – Once the dough has reached the right consistency, turn o the appliance and wait for the
hooks to stop rotating.
7. Disassembly and cleaning – Unplug the blender, carefully remove the hooks and wash them by hand. Do not
immerse the drive unit in water.
8. Storage – Once completely dry, store the hooks in a dry place, preferably separately from other accessories to
avoid damage.
Accessory User Manual – Blender Shaft
1. Preparing the device – Before assembling the blender shaft, make sure that the hand blender is unplugged.
2. Assembling the blender shaft – Attach the blender shaft to the main unit. until you hear a click or feel a rm seat.
3. Preparing the ingredients – Place the ingredients (e.g. fruits, vegetables, soups, sauces) in a suitable container.
4. Starting the device – Turn on the blender, starting at the lowest speed, then gradually increase it, adjusting it to
the type of ingredients.
5. Blending control – Move the blender shaft around the container to achieve a uniform consistency. Avoid
blending very hard ingredients, which can damage the blades.
6. Finishing work – Once the desired consistency is achieved, turn the device o and wait for the blades to stop
rotating.
7. Disassembly and cleaning – Unplug the blender, remove the blender shaft and wash it by hand. Do not immerse
the motor unit in water.
8. Storage – Once dry, store the blender shaft in a dry place, preferably separately from other accessories to avoid
damage.
Bekijk gratis de handleiding van Zelmer Impress ZHB4845, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zelmer |
| Model | Impress ZHB4845 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 5759 MB |
