Handleiding
Je bekijkt pagina 11 van 68
11
PL
EN
In order to ensure the sealing eect of blending blade, please do not allow the blending blade to work without
load.
Do not pull on the connection cord in order to unplug it or use it as a handle.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact an ocial
technical support service. In order to prevent any risk of danger, do not open the device. Only qualied technical
personnel from the brand’s ocial technical support service may carry out repairs or procedures on the device.
Only for indoor use.
Product has a thermal safety component that operates in case of abnormal higher temperatures. In case of
operation of this component, it is needed to unplug the product from mains and let cool for at least 15min.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-
observance of these warnings.
INSTRUCTIONS FOR USE
1.Fill the appropriate container with the food to be processed.
2. Attach the appropriate attachment with accessories or container to the main unit (2).
3. Plug the appliance into a power outlet.
4. Press the power button. To adjust the speed, press or release the power button.
5. To stop the appliance completely, release the power button.
The maximum continuous operation time should not exceed 1 minute. Before using the appliance again, cool
down. A rest time of at least 3 minutes should be maintained between two consecutive operating cycles.
Instructions for use of the hand blender with a bottle attachment
1. Preparing the ingredients
Make sure that the ingredients are properly cut and do not exceed the maximum capacity of the bottle.
Do not pour hot liquids - wait for them to cool down to room temperature.
2. Installing the blades
Place the ingredients in the bottle, not exceeding the MAX line.
Screw the blender attachment with blades onto the bottle, making sure it is securely tightened.
3. Attaching to the blender
Turn the bottle with the blades installed upside down.
Attach it to the main unit by tting and pressing the latching mechanism of the main unit into the appropriate
slots located on the blender attachment.
4. Blending
Hold the bottle with one hand and press the power button with the other.
Blend until the desired consistency is achieved, making short pulsating movements if necessary.
Do not blend for longer than the recommended time of continuous operation of the device.
5. Ending and dismantling
Release the button and wait for the blades to stop completely.
Remove the bottle from the blender and carefully unscrew the tip with blades.
6. Preparing to drink
If the bottle has a special lid, close it. You can take the drink with you.
If necessary, pour the contents into another container.
7. Cleaning
Wash the bottle and blade attachment with warm water and detergent.
Do not immerse the electrical parts of the blender in water.
Bekijk gratis de handleiding van Zelmer Impress ZHB4845, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zelmer |
| Model | Impress ZHB4845 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 5759 MB |
