Zeiss DTI 6/20 handleiding
Handleiding
Je bekijkt pagina 12 van 100
12 | 100 EN
Settings Calibration Menu
With this device you can select two calibration modes: automatic or manual.
In automatic mode, the device automatically performs a calibration by closing and
opening an internal shutter when necessary. A gentle click should be heard. In this
mode, you also have the option of performing the calibration yourself by pressing
the Shutter button (7) and the Menu button (6) simultaneously.
Another option is to select manual mode. Close the lens cap (1) in manual mode.
Now press the Shutter button (7) and the menu button (6) simultaneously. The
device is now calibrated again.
Note: Always cover the lens with the protective cap when performing a manual
calibration. Otherwise the sensor cannot calibrate correctly and the image will
deteriorate, e.g. ghost images. If you forget to cover the lens during a manual
calibration, repeat the calibration procedure with the lens covered.
Settings Location Menu
Set the GPS function “On“ or “O“ here.
Settings Device Menu
Language
To change the language, select “Settings” in the main menu. Then navigate to
“Settings Device Menu”. Briey press the menu button (6) to open the submenu.
Navigate to “Language” and briey press the menu button (6). Choose between one
of six languages and conrm your selection by briey pressing the menu button (6).
Press and hold the menu button (6) to return to observation mode.
Date
To set the date, select “Settings” in the main menu. Then navigate to “Settings
Device Menu”. Briey press the menu button (6) to open the submenu. Navigate to
“Date” and briey press the menu button (6). Set the current date and conrm the
selection by briey pressing the menu button (6). Press and hold the menu button
(6) to return to observation mode.
Note: The date adjusts itself automatically if GPS is enabled.
Time
To set the time, select “Settings” in the main menu. Then navigate to “Settings
Device Menu”. Briey press the menu button (6) to open the submenu. Navigate to
“Time” and briey press the menu button (6). Set the current time and conrm the
selection by briey pressing the menu button (6). Press and hold the menu button
(6) to return to observation mode.
Time Format
The “Time Format” setting allows you to choose between 24-hour and 12-hour
display. Be sure to set the current date and time, as your photos and videos will be
time stamped.
To set the time format, select “Settings” in the main menu. Then navigate to
“Settings Device Menu”. Briey press the menu button (6) to open the submenu.
Navigate to “Time Format” and briey press the menu button (6). Select the desired
time format and conrm the selection by briey pressing the menu button (6). Press
and hold the menu button (6) to return to observation mode.
Settings Pairing Menu
To pair devices, select “Settings” in the main menu. Then navigate to “Settings
Pairing”. Briey press the menu button (6) to open the submenu. Here you nd a list
of all devices already known. To switch between the various paired devices, select
the desired device and conrm the selection by briey pressing the menu button (6).
To connect a device for the rst time, go to “Connected Products“ in the ZEISS
Hunting App. Select the ZEISS DTI 6 and conrm the “Connect“ displayed on the
screen. Compare the PIN on the smartphone and on the ZEISS DTI 6. By selecting
“Pair“ in the ZEISS Hunting App as well as on the ZEISS DIT 6, you conrm the
connection.
If the smartphone was already paired at an earlier date, no further steps are
necessary.
Press and hold the menu button (6) to return to observation mode.
Note: An active connectivity is required for pairing.
Settings Reset Menu
To format the device memory, select “Settings” in the main menu. Then navigate to
“Settings Reset Menu” and briey press the menu button (6). Navigate to “Format
Memory”. Select “Format” and conrm your selection. A second security prompt
follows, which must be conrmed with “Yes”. Select “No” if you do not want to
perform the formatting.
Note: Formatting deletes all videos and photos saved on the device. The device
settings are retained.
To perform a factory reset, select “Settings” in the main menu. Then navigate to
“Settings Reset Menu” and briey press the menu button (6). Navigate to “Reset
to Factory Settings”. Select “Reset” and conrm your selection. A second security
prompt follows, which must be conrmed with “Yes”. Select “No” if you do not
want to perform a factory reset.
Note: When resetting the device to factory settings, the settings and all data saved
on the device, including images and videos, are deleted.
Note: After resetting the device to the factory settings, delete the ZEISS DTI 6 from
the Bluetooth overview on your smartphone.
Note: If the battery is discharged or if the battery is removed, the device loses the
set date and time. Reset the date and time so that your images and videos get a
correct timestamp.
Furthermore, the date and time can be received by connection via the Hunting App
or GPS.
Bekijk gratis de handleiding van Zeiss DTI 6/20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zeiss |
| Model | DTI 6/20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19336 MB |
