Zeiss Conquest V4 1-4x24 handleiding
Handleiding
Je bekijkt pagina 15 van 225
15 | 225 EN
%DOOLVWLF7XUUHWIRU=(,66&RQTXHVW9[[DQG[
,I\RXU=(,66&RQTXHVW9ULıHVFRSHLVHTXLSSHGZLWKWKHEDOOLVWLFWXUUHW\RXKDYH
the option of staying on the spot quickly and easily at a range of distances.
The bullet-drop is compensated in line with the distance by adjusting the sight
OLQHRIWKHULıHVFRSHZLWKRXWUHPRYLQJWKHSURWHFWLYHFDSRIWKHUHWLFOHDGMXVWPHQW
The rotary knob (14) features a linear graduation. The distance from interval to
interval is one click which corresponds to 1/4 MOA. Every fourth mark is marked
with the corresponding MOA value.
If the ballistic values for an accurate aiming at 100 yds/m are known, the number
of required clicks can be directly calculated and noted for the various distances.
Note: A stop in the ballistic turret prevents downward adjustment past
WKHPDUN
Note: More than two rotations are required to fully utilize the entire vertical and
ODWHUDODGMXVWPHQWUDQJHRIWKHULıHVFRSH
Circular marks on the bottom of the adjustment knob mark the position in which
rotation the turret is positioned. If the adjustment knob is mounted correctly, you
DUHLQWKHİUVWURWDWLRQDQGWKHİUVWULQJLVYLVLEOH
If the screw is turned counterclockwise, the adjustment knob (14 or 20) will turn
out. If the screw is turned clockwise, the adjustment knob (14 or 20) will turn in.
If circular marks are visible at the bottom of the adjustment knob after correcting
the turret, a complete rotation (80 clicks) has been made in the zero setting. Three
visible circular marks correspond to two rotations (160 clicks) in the zero setting.
Firing the weapon with the ballistic turret:
Proceed as follows for a downward shot correction past the zero mark:
Ballistic turret I Unscrew the screw (13)DQGSXOORĴDGMXVWPHQWNQRE(14).
Ballistic turret II Unscrew the screws (16) and lift out driver (17).
Ballistic turret III Insert the coin (18) into the slot provided in the adjustment
knob (19).
,IWKHZHDSRQVKRRWVORZit requires an upward
FRUUHFWLRQUP in other words turn the coin (18)
counterclockwise.
If the weapon shoots high, it requires a downward
correction, in other words turn the coin (18)
counterclockwise.
,IWKHZHDSRQVKRRWVWRWKHOHIWit requires a correction
WRWKHULJKWRLQRWKHUZRUGV turn the adjustment knob
(19) counterclockwise.
If the weapon shoots to the right, it requires a correction
to the left, in other words turn the adjustment knob (19)
clockwise.
$IWHUWKHULıHKDVEHHQ]HURHGLQWR\GVPWDUJHW
Ballistic turret IV Position the driver (17) so that the stop pin of the driver (21)
VLWVRQWKHVWRSSLQRIWKHULıHVFRSH(22). Retighten
the screws (16).
Ballistic turret V Position the adjustment knob (14)VRWKDWWKHPDUN
corresponds to index marking on the locking ring (15).
Retighten the screws (13).
IV
V
Ballistic Turret 4-16x44 | 4-16x50 | 6-24x50
(14)
(15)
(15)
(13)
T 8
1,0 Nm
( ~ 0,74 lb fft)
(20)
T 8
(16)
(19)
(19)
(18)
(20)
(15)
(16)
(16)
(17)
(22)
T 8
(16)
(17)
(21)
Bekijk gratis de handleiding van Zeiss Conquest V4 1-4x24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zeiss |
| Model | Conquest V4 1-4x24 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 41983 MB |
