Handleiding
Je bekijkt pagina 24 van 42
24
Determining Thermal Media Types
Your printer only supports direct thermal. Some thermal printers require transfer ribbon (ink) for
printing while direct thermal media does not. To determine if a particular media is direct thermal media,
perform a media scratch test.
To perform a media scratch test, complete these steps:
1. Scratch the print surface of the media with a finger nail or pen cap. Press firmly and quickly while
dragging it across the media surface. Direct thermal media is chemically treated to print (expose)
when heat is applied. This test method uses friction heat to expose the media.
2. Did a black mark appear on the media?
Replacing Supplies
If labels run out while printing, leave the printer power on while reloading (data loss results if you turn
off the printer). After you re-load media, press the Feed button to restart.
Always use high quality, approved labels. If adhesive backed labels are used that don’t lay flat on the
backing liner, the exposed edges may stick to the label guides and rollers inside the printer, causing
the label to peel off from the liner and jam the printer.
Adjusting the Print Quality
Print quality is influenced by the heat (density) setting of the printhead, the print speed, and the media
in use. Experiment with these settings to find the optimal mix for your application.
Note • Media manufactures may have specific recommendations for speed settings for your printer
and the media. Some media types may have lower maximum speeds than your printer’s maximum
speed.
If you find that the print speed or darkness needs to be adjusted, use:
• The Windows printer driver or application software such as ZebraDesigner ™ .
• The printer does not save any settings.
If a black mark... Then the media is...
Does not appear on the media Thermal transfer. A ribbon is required. Your
printer does not support this media.
Appears on the media Direct thermal. No ribbon is required.
Bekijk gratis de handleiding van Zebra ZD120, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zebra |
| Model | ZD120 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 3723 MB |
