Zebra 8515 handleiding
Handleiding
Je bekijkt pagina 23 van 136
Basic Checkout 1 - 3
Important Operating Instructions
Backup Battery
The computer backup battery provides one hour of memory backup. The capacity is reduced as the operating
temperature cools. The table below provides a general outline of battery capacity based on the operating
temperature. Charging of the backup battery will occur between 0° C and 40° C.
Switching the 8515 On and Off
• To switch on the 8515, press the [ENTER/ON] key.
To switch off the 8515:
• Press the [BLUE] key, and then press the [ENTER/ON] key.
Turning off the 8515 does not result in a complete reboot; rather, the unit enters a power-saving, “suspend”
state. When the 8515 is turned on from suspend state, operation resumes within a few seconds.
Calibrating the Touchscreen
If your 8515 touchscreen has never been calibrated or if you find that the stylus pointer is not accurate when
you tap on an item, use the Stylus Properties dialog box in the Control Panel to recalibrate the screen.
• In the Control Panel, choose the Stylus icon to display the Stylus Properties window.
WARNING! IT IS CRITICAL that this information be reviewed and that any guidelines applicable
to your 8515 be strictly followed.
NOTE If the backup battery temperature is less than 10° C and a brown-out occurs, the display backlight
will switch off in order to maintain computer operations. The backlight will switch back on when
external power is restored or the battery temperature is above 10° C.
WARNING! Do not install the 8515 in such a way that the power cable is bent 90 degrees as this
may damage the power cable and power cable strain relief.
NOTE If the 8515 is in suspend state, pressing [ENTER/ON] ‘wakes’ the unit from this state. The screen
in which you were working before the computer entered suspend state is displayed.
IMPORTANT If the word BLUE is displayed in uppercase in the taskbar at the bottom of the screen,
this key is locked on — the 8515 will not switch off. Press the [BLUE] key again to unlock
it; then press [BLUE] [ENTER/ON] to switch the 8515 off.
If, however, you’ve disabled the Blue Key in the One Shot dialog box, the 8515 can be
turned off even when the [BLUE] key is locked on.
Bekijk gratis de handleiding van Zebra 8515, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zebra |
| Model | 8515 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14283 MB |
