YSI MultiLab handleiding
Handleiding
Je bekijkt pagina 11 van 28
IDS WA System Commissioning
ba76199e03 08/2018 11
3.5.1 Removing the IDS WA-S adapter from the plug head of the IDS sensor
3.6 Establishing a wireless connection
3.6.1 The Sensors menu
You can administer the sensors for your IDS meter in the Sensors menu.
Make sure that the plug connection is completely dry and clean.
1. Open the locking device on the plug head sensor.
2. Align the guidance (1) of the IDS WA-S adapter to the notch (2) in the plug of
the plug head sensor and insert the IDS WA-S adapter into the unlocked plug
of the plug head sensor until is clicks into place.
3. Close the locking device on the plug head sensor.
Make sure that the plug connection is completely dry and clean. If
necessary, clean the plug connection prior to opening.
1. Open the locking device on the plug head sensor.
2. Press together the clips of the IDS WA-S adapter with your thumb and forefin-
ger and pull the IDS WA-S adapter out of the plug.
Bekijk gratis de handleiding van YSI MultiLab, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | YSI |
| Model | MultiLab |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1943 MB |
