YSI 2900D handleiding
Handleiding
Je bekijkt pagina 39 van 172
5-6
2. Touch [New] and choose from the selection of supported racks and plates. Alternatively, use the arrows to scroll
through the saved racks and plates until you find the type that you are using.
3. You may rename the rack/plate by touching its ID.
4. After selecting your plate or rack, touch the [Edit] button.
5. Touch the location of each sample for the first batch (selected locations are blue).
6. Touch [Batch].
7. Select the chemistries to run in this batch.
8. Enter any optional parameters, such as Batch Name (separate name for this batch), Dilution Factor, Units, Multi-
Sample (multiples of each sample location in this batch), or Repeats (multiples of the entire batch).
Please note that the instrument does not automatically dilute samples.
9. If you diluted your samples:
a. Touch the Dilution Factor [1] button.
b. Enter your dilution factor then touch [OK].
10. To change the number of sample replicates:
a. Touch the Multi-Sample [1] button.
b. Enter the number of times each sample in the batch should be run, then touch [OK].
11. To repeat the entire batch:
a. Touch the Repeats [0] button
b. Enter the number of times the entire batch should be repeated.
12. Touch to save the batch.
Arrows
Bekijk gratis de handleiding van YSI 2900D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | YSI |
| Model | 2900D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 50780 MB |
