Yato YT-8271 handleiding
Handleiding
Je bekijkt pagina 8 van 40
8
ORIGINAL INSTRUCTIONS
EN
Electric safety
The plug of the power supply cable must fi t the mains socket. Do not modify the plug. Do not use any adapters whatso-
ever in order to adapt the plug to the socket. Unmodifi ed plug which fi ts the socket reduces the risk of an electric shock. Avoid
contact with grounded surfaces, such as pipes, heaters and refrigerators. Grounding of the body increases the risk of an
electric shock. Do not expose electric tools to precipitation or humidity. Water and humidity which gets into the electric tool
increases the risk of an electric shock. Do not overload the power supply cable. Do not use the power supply cable in order
to carry the tool or to connect and disconnect the plug from the mains socket. Avoid contact of the power supply cable
with heat, oils, sharp tools and moving elements. Damage to the power supply cable increases the risk of an electric shock.
In case work is realised outside closed areas, it is necessary to use extension cords designed for applications outside
closed areas. Using a correct extension cord permits to reduce the risk of an electric shock.
Personal safety
Commence work in good physical and psychological conditions. Pay attention to what you do. Do not work if you are
tired or under eff ects of medicines or alcohol. Even a moment’s inattention during work may lead to serious injuries. Always
use individual means of protection. Always wear goggles. Using individual means of protection, such as dust-masks, pro-
tective shoes, helmets and hearing protections permits to reduce the risk of serious injuries. Avoid accidental activation of the
tool. Make sure the switch is in the OFF position, before you connect the tool to the mains. Holding the tool with a fi nger
on the switch or connecting an electric tool when the switch is in the ON position may lead to serious injuries. Before you turn an
electric tool on remove all the spanners and other tools, which have been used for adjustments. A spanner left on rotating
elements of the tool may lead to serious injuries. Keep your balance. Maintain an appropriate position. It will permit to control
the electric tool in case of unpredicted situations during its operation. Use protective clothes. Do not wear loose clothes or
jewellery. Keep your hair, clothes and gloves away from moving elements of the electric tool. Loose clothes, jewellery or
long hair may get caught on moving elements of the tool. Use dust extractors or dust containers, if the tool is equipped with
any. Make sure they are properly connected. Using of dust extractors permits to reduce the risk of serious injuries.
Operation of the electric tool
Do not overload the electric tool. Use a proper tool for the given purpose. A correct selection of the tool for the given work
will result in a more effi cient and safer work. Do not use the electric tool if the switch is not functioning properly. A tool which
may not be controlled by means of a switch is dangerous and must be repaired. Disconnect the plug from the mains socket
before any adjustment, replacement of accessories or storage of the tool. It will permit to avoid accidental activation of the
electric tool. Store the tool away from children. Do not allow untrained persons to operate the tool. An electric tool may be
dangerous in hands of an untrained person. Make sure the tool is properly maintained. Check the tool in order to detects
any unfi tting or loose moving elements. Check whether the elements of the tool are not damaged. In case any damaged
elements of the tool are detected, they must be repaired before the electric tool is operated. Many accidents are caused
by improper maintenance of tools. Cutting tools must be sharp and clean. Properly maintained cutting tools are easier to
control during work. Use electric tools and accessories in accordance with the aforementioned instructions. Use the tool
in accordance with its purpose, taking into account the kind and conditions of work. Should the tool be used for other
applications than the ones it has been designed for, the risk of a dangerous situation increases.
Repairs
The tool may be repaired only by authorised service centres, which must use solely original spare parts. It will guarantee
a proper level of safety of operation of the electric tool.
PREPARATION FOR WORK AND USING OF THE TOOL
Before work is commenced, make sure the body the cable with a plug and the extension cords are not damaged. If necessary, the
tool must be cleaned and the ventilating holes cleared. If any damage is detected, it is prohibited to continue working! Note! All the
actions related to replacement or cleaning elements of the soldering tool must be realised when the power supply of the tool is off ,
so before you proceed to these actions: Disconnect the plug of the power supply cable of the tool from the mains socket!
Soldering must be realised by an adult acquainted with the industrial safety regulations related to soldering. Before the tool is
used, make sure the parameters of the power supply mains correspond to the data presented in the rating plate. Before soldering,
clean thoroughly the metal elements to be soldered as well as the soldering tip of the soldering tool. In case the soldering ti
p is
burnt, replace it with a new one. Before soldering, clean the surface to be soldered of any foreign matter, particularly grease. Do
not ever grind the soldering tip with abrasive paper, since it would damage the soldering tip coating.
Replacement of soldering tip
A used, narrow or dirty soldering tip must be replaced.
Loosen the screw at the soldering tip, and then remove it and replace with a new one. Make sure the soldering tip touches the
heating element, and then tighten screw.
Replacement of the heating element
Replacement of the heating element is complex and it requires adequate knowledge and authorisation. The heating element must
Bekijk gratis de handleiding van Yato YT-8271, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yato |
| Model | YT-8271 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4065 MB |
