Yamaha WaveRunner JetBlaster PRO (2025) Handleiding (114 Pagina's)

Handleiding

Watercraft operation

34

gine speed each above and below the initial

engine speed.

This function can be used only when the wa-

tercraft is in neutral, or when the watercraft is

shifted into forward and the engine is operat-

ing at idling speed.

TIP

If the no-wake mode is activated when the

watercraft is in neutral, the watercraft will au-

tomatically shift into forward and the water-

craft will start moving at a low speed.

Activating and deactivating the no-wake

mode

The activation of the no-wake mode can be

confirmed by the no-wake mode indicator on

the multifunction information center.

To activate the no-wake mode:

(1) Shift into neutral, or release the throttle

lever and let the engine speed return to

idle.

(2) Push and hold the “CRUISE/NO WAKE”

switch. Once the beeper sounds three

times and the no-wake mode indicator is

displayed, the no-wake mode is activat-

ed.

(3) Push the upper side or the lower side of

the “SPEED ADJUST” switch to adjust

the engine speed to three settings: “No

Wake –1”, “No Wake” (standard setting),

and “No Wake +1”.

To deactivate the no-wake mode:

Perform one of the following operations. The

beeper sounds two times and the no-wake

mode indicator disappears when the no-

wake mode is deactivated.

 Push the “CRUISE/NO WAKE” switch.

 Squeeze the throttle lever.

 Squeeze the RiDE lever.

TIP

The no-wake mode is also deactivated when

the engine is stopped.

1 No-wake mode indicator

2 No-wake mode level

14.3v

RPM

x1000

km/h

No Wake +1

1 2

1 “CRUISE/NO WAKE” switch

1 “SPEED ADJUST” switch

1

UF5R70E0.book Page 34 Friday, October 4, 2024 9:02 AM

Bekijk gratis de handleiding van Yamaha WaveRunner JetBlaster PRO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.