Yamaha Rio1608-D3 handleiding
Handleiding
Je bekijkt pagina 32 van 44
Operations
Rio3224-D3 Rio1608-D3 Reference Manual
32
Factory-set initial values
The following table provides the factory-set initial values.
*1 The default setting of the Sample Rate is 96 kHz. Please be careful when using Rio-D3 in combination with
devices that do not support 96 kHz (such as CL or QL series).
*2 “nnnnnn” represents the lowest six digits of the Dante Primary MAC Address.
Parameter Initial value
SETUP UNIT ID Y001
START UP (START UP
Mode)
REFRESH with MUTE
SEC.PORT (SECONDARY
PORT)
DAISY CHAIN
FAN SPEED LOW
BRIGHTNESS 20
CONTRAST 10
BAR COLOR GREEN
BAR ACTION ON
IMPEDANCE 10 kΩ
CONTROL NW PORT NETWORK MODE STATIC IP
IP ADDRESS 192.168.0.2
SUBNET MASK 255.255.255.0
DEFAULT GW 192.168.0.1
CONTROL DANTE PORT NETWORK MODE DHCP
IP ADDRESS (determined by DHCP or Link Local)
SUBNET MASK (determined by DHCP or Link Local)
DEFAULT GW (determined by DHCP or Link Local)
HA parameter HA Gain −6 dB
+48V OFF
HPF OFF, 80 Hz
GC (GAIN COMPENSATION) OFF, −6 dB
OUTPUT parameter PHONES Patch L: - (No assignment), R: MONO
OUTPUT Gain 0 dB
PHS (PHASE) OFF
DLY (DELAY) OFF, 0.00 ms
Dante settings Sample Rate 96 kHz (follower),
Pull-up/down = None
*1
Latency 1.0 msec
Encoding PCM 24-bit
Dante Redundancy Switched
IP Address Auto
Device Label Y001-Yamaha-Rio3224-D3-nnnnnn
*2
Y001-Yamaha-Rio1608-D3-nnnnnn
*2
Channel Label <Channel number>
AES67 Mode Disabled
Device Lock Unlock
Parameter Initial value
Bekijk gratis de handleiding van Yamaha Rio1608-D3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamaha |
| Model | Rio1608-D3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5838 MB |
