Yamaha Rio1608-D3 handleiding
Handleiding
Je bekijkt pagina 20 van 44
Screens
Rio3224-D3 Rio1608-D3 Reference Manual
20
CONTROL menu
You can view and edit the settings for the two Ethernet ports on the unit.
You can control the Rio-D3 from R Remote or ProVisionaire by using the NW PORT (network
port) and/or DANTE PORT (Dante port) for communications. You can use the NW PORT
(network port) and DANTE PORT (Dante port) simultaneously when you want to handle the
Dante circuit and control circuit separately.
While the CONTROL screen is displayed, turn the encoder with switch to select a parameter,
and then press it to confirm.
NOTE
• Make sure that the network addresses of the NW PORT and DANTE PORT are unique. If you
set them to the same address, an error message will appear.
• Make sure that the network addresses of the NW PORT and Dante PRIMARY/SECONDARY are
unique. If you set them to the same address, an error message will appear.
• Do not set two or more values to DEFAULT GATEWAY. If you set two or more values, only one
will be accepted as valid.
SEC.PORT
(SECONDARY
PORT)
Specifies the operating mode of the SECONDARY
port.
DAISY CHAIN*,
REDUNDANT
FAN SPEED Specifies the rotation speed of the fan. LOW*, HIGH
BRIGHTNESS Specifies the brightness of the display and color bar
indicator.
You can also adjust this parameter by pressing and
holding the [ ] (Back) key to display the Contrast/
Brightness adjustment popup screen, and turning
the encoder with switch.
0–20
20*
CONTRAST Specifies the display contrast.
You can also adjust this parameter by pressing and
holding the [ ] (Back) key to display the Contrast/
Brightness adjustment popup screen, and turning
the encoder with switch.
0–20
10*
BAR COLOR Specifies the color of the COLOR BAR. OFF, GREEN*, BLUE
BAR ACTION Specifies the type of error indicator on the COLOR
BAR.
OFF, BLINK, ON*
IMPEDANCE Specifies the output impedance. 10K*, 600
(Unit: Ω)
INITIALIZE Specifies the type of memory that you want to
initialize. Select the memory, and then press the
encoder with switch. A confirmation message
appears. Press [OK] to execute initialization.
FACTORY PRESET:
Reverts this product to factory settings.
CURRENT PARAMETERS:
Initializes the HA and OUTPUT parameters.
DANTE SETTINGS:
Initializes the Dante settings.
NOTE
See “Performing Initialization” on page 30 for
instructions.
FACTORY PRESET*,
CURRENT PARAMETERS,
DANTE SETTINGS
Item Description
Setting value (“*” represents
the default value.)
CONTROL
NW PORT DANTE PORT
NETWORK MODE
IP ADDRESS
SUBNET MASK
DEFAULT GW
NETWORK MODE
IP ADDRESS
SUBNET MASK
DEFAULT GW
Bekijk gratis de handleiding van Yamaha Rio1608-D3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamaha |
| Model | Rio1608-D3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5838 MB |
