Yaesu FT-847 handleiding
Handleiding
Je bekijkt pagina 26 van 108
24
FT-847 OPERATING MANUAL
(27) SPLIT [N/R] Switch
Pressing this switch activates split-frequency opera-
tion between the main display (either the Main VFO
or a Memory Channel), used for transmission, and the
Sub VFO, used for reception. The “Split” mode is not
used for full-duplex satellite operation. When the SPLIT
mode is activated, the “
SPLIT
” icon will appear on the
display panel.
In the SATELLITE mode, pressing this key toggles the
VFO Tracking feature between the “Normal” and “Re-
verse” (inverted) tracking modes.
(28) SAT Switch
Pressing this switch activates the full-duplex SATEL-
LITE mode of operation, in which the Main and Sub
VFOs are used for crossband satellite operation. The
“ ” icon will appear on the display panel during
satellite operation.
(29) MCK/W Switch
Pressing this switch momentarily checks the contents
of the current memory channel without switching the
transceiver out of the VFO mode. The MEM/VFO CH
knob may then be rotated to select, for example, an
unused channel (to be used for memory storage).
Pressing and holding in this switch for ½ second trans-
fers the Main VFO frequency into the current memory
channel register. A double-beep will confirm memory
storage.
(30) A
u
t
B Switch
Pressing this switch momentarily causes the contents
of the Main VFO and the Sub VFO to be swapped.
(31) SUB Switch
Pressing this switch momentarily allows direct key-
board frequency entry and/or mode change to be per-
formed on the Sub VFO register.
Front Panel Controls & Switches
Bekijk gratis de handleiding van Yaesu FT-847, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yaesu |
| Model | FT-847 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17150 MB |
