Xvive More You handleiding
Handleiding
Je bekijkt pagina 6 van 35
a. Using the Top Encoder (to the right of the 3 dots) will allow you to select your
inputs. If you only have a HUB, you will only be able to select INPUTS 1 and 2. As you
expand with 2X/4X/8X expansion units, these other channels will show up and you
will be able to select them.
b. FOR EXAMPLE – If you have a vocal mic plugged into Input #1 on the HUB, you rst
select channel 1 with the top encoder. You then use the bottom encoder knob to
set the gain of the selected Input. The bank of buttons to the left of the HUB
screen can be used to select other preamp options. These include: 48V (phantom
power), PHASE (reverse), HI PASS (lter for cutting low frequencies), DIRECT
(monitor direct input or eected signal from DAW), and INST (for unbalanced
instrument inputs).
c. Using the top encoder knob, switch to Channel 2, and choose your preamp
settings for Channel 2.
d. AUTO GAIN – Note: In GAIN Mode, if you press the lower encoder, it will give you
two Auto Gain choices: one is for the selected channel only, and one option is for
ALL CHANNELS. When you make your selection, just click a second time to set the
Auto Gain.
9. MORE YOU – “MIX” and “REVERB” knobs in the lower section of HUB: The MIX 1 and MIX
2 knobs allow you to immediately adjust the level of each of the two inputs (mic/instrument,
etc.) and add REVERB. NOTE: this will only aect what you hear in your headphones. THIS
is the MORE YOU part of MORE YOU!
10. Discreet Headphone Mix – If you click the Top Encoder knob you will switch to an
ingenious mode called “LIVE MIX.” In a nutshell, this is a common mix that all other
musicians will hear… with one cool feature: your local inputs on your MORE YOU box are
controlled with the knobs in the MORE YOU section, JUST FOR YOU. Everyone else (as you
add 2X/4X/8X units) hear the LIVE MIX + their local inputs.
MORE YOU Monitoring:
11. Now you should be able to record to your DAW with your HUB’s two inputs.
12. The RED PILL or the BLUE PILL: IMPORTANT – If, for some reason, you don’t hear
your DAW coming out of your speakers, you may want to check that the button near
your BIG KNOB labeled “MONITORS” is set to the RED setting. There is also an
advanced setting (the BLUE setting) that allows you to monitor the MORE YOU
internal headphone system through you studio monitors.
More on this later—but for now, just make sure the button is on the RED setting.
Studio Monitor = RED MODE
The rest of this manual is for later reference, as you need it!
For now, MAKE MUSIC and GET RECORDING!
Top Encoder knob
Lower Encoder knob
Bekijk gratis de handleiding van Xvive More You, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Xvive |
| Model | More You |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11327 MB |
