Handleiding
Je bekijkt pagina 14 van 396
Icon
Error description Solution
Error code
remains on
INV output short
Please turn o the device and check all connected AC devices
and cables for faults or damage. Remove any faulty devices
before restarting.
Error code
remains on, high
temperature icon
is ashing
MOSFET OTP (over
temperature protection) error
The device has detected overheating in the power components
and has shut down to protect itself. Please allow it to cool
before restarting.
Error code
remains on
Fan stop
Check fan for obstructions, turn on and o, contact customer
service if still not xed.
Error code
remains on
Discharge soft start error
This indicates an issue during the initial power output ramp-up
phase. Please check connected devices and reduce the load if
necessary.
Error code
remains on
Charge soft start error
The device encountered an issue while beginning the charging
process. Please ensure the charger and cables are properly
connected and use a compatible charger.
Error code
remains on
MOSFET UTP (under
temperature protection) error
Turn Power Station o and on. Automatic recovery after the
Power Station heats up.
Error code
remains on
DC input hardware
overcurrent protection error
Remove DC charging devices, auto recover after connecting DC
and turning on.
Error code
remains on
DC input software
overcurrent protection error
Stop DC charging, auto recover after connecting DC and
turning on.
Error code
remains on
Car charge output/DC5521
OCP (overcurrent protection)
error
Turn o output, manual recover after error is cleared.
Error code
remains on
PV (solar) output OVP (over
voltage protection) error
Remove the PV charging, auto recover after error is cleared.
Error code
remains on
DC input voltage over-voltage
protection
Stop DC. Auto recover after fault is cleared.
Error code
remains on, high
temperature icon
is on
DC input over temperature
protection error
Stop DC. Auto recover after error is cleared.
Error code
remains on, high
temperature icon
is on
Car charge output over
temperature protection error
Turn o output, manual recover after error is cleared.
Error code
remains on
Abnormal communication
Turn on and o, or change operation environment. Contact
customer support if still not xed.
Error code
remains on
Abnormal USB Auto recover after removing abnormal USB.
Error code
remains on
Abnormal USB-C Auto recover after removing abnormal USB-C.
Error code
remains on
The battery voltage is too low.
The battery is broken.
Contact customer service.
If none of the above information can solve problem you encounter, please contact customer service for
consultation.
If an error code appears and the icon still does not disappear after restarting the device, please stop using it
immediately (do not try to charge or discharge).
Bekijk gratis de handleiding van Xtorm XP2W1800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Xtorm |
| Model | XP2W1800 |
| Categorie | powerbank |
| Taal | Nederlands |
| Grootte | 44219 MB |
