Xiaomi Mi Vacuum Cleaner G9 Plus handleiding
Handleiding
Je bekijkt pagina 20 van 21
19
Troubleshooting
Issue Possible Cause Solution
The vacuum cleaner does not work.
It is out of battery or has low battery. Fully charge the vacuum cleaner, then resume use.
It enters into overheat protection mode triggered
by a blockage.
Clear any blockages and restart the vacuum
cleaner when it cools down.
Its suction opening or airway passage is blocked.
Clear any blockages from suction opening or
airway passage.
The suction power reduces.
The dust compartment is full and/or the filter is
clogged.
Empty the dust compartment and clean the filter.
The high torque brush bar, the extension rod, or
other parts are blocked.
Clear any blockages from the high torque brush
bar, the extension rod, or other parts.
The motor makes a strange noise.
The main suction opening or the extension rod is
blocked.
Clear any blockages in the main suction opening or
the extension rod.
The battery indicator does not light up while
charging.
The charger is not connected to the vacuum
cleaner.
Make sure the charger is plugged in correctly.
The battery is fully charged and went into sleep
mode.
The vacuum cleaner can be used normally.
If the problem still persists after ruling out the above two possibilities, please contact after-sales service
for help.
The battery charges slowly. The battery temperature is too low or too high.
Wait until the battery temperature normalizes,
then resume use.
Bekijk gratis de handleiding van Xiaomi Mi Vacuum Cleaner G9 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Xiaomi |
| Model | Mi Vacuum Cleaner G9 Plus |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 1375 MB |
