Workzone AB1600 handleiding

Handleiding

123456789101112131415161718/ 18

Afdrukken

Je bekijkt pagina 14 van 18

18

AFTER SALES SUPPORT

 support@scheppach.com.au

 1300 855 831

MODEL: AB1600 PRODUCT CODE: 53670 08/2017

AUS

Maintenance AB1600

IX. MAINTENANCE

m Warning! Always pull out the mains power plug before starting any cleaning

work.

Cleaning

Disconnect the mains plug, and wait until the rotating tool stands still. All protection

and safety devices must be immediately re-installed once the repair and

maintenance work is completed. The built-in ball bearings are maintenance-free.

Recommendations:

• Keep all safety devices, air vents and the motor housing free of dirt and dust

as far as possible. Wipe the equipment with a clean cloth or blow it with com-

pressed air at low pressure.

• We recommend that you clean the device immediately each time you have n-

ished using it.

• Clean the equipment regularly with a moist cloth and some soft soap. Do not

use cleaning agents or solvents; these could attack the plastic parts of the

equipment. Ensure that no water can seep into the device.

Carbon brushes

In case of excessive sparking, have the carbon brushes checked only by a qualied

electrician. Important! The carbon brushes should not be replaced by anyone but

a qualied electrician.

Check the oil level (Fig. 5)

Check the oil level before using the machine. Place the machine on the oor with the

tool mounting pointing downwards. The oil must be at least 3 mm above the bottom

edge of the inspection window (6). Changing the oil: The oil should be changed after

around 40-50 hours of use. Recommended oil: 25ml SAE 15W/40 or an alternative

of the same quality.

Oil change (Fig. 7)

Switch off the machine and pull the mains plug out of the socket.

Undo the hexagonal head screw with the inspection window (6) using the spanner

(9) and drain the oil. To prevent the oil from running out in an uncontrolled manner,

hold a small metal chute under the opening and collect the oil in a vessel until it has

fully drained out of the machine.

123456789101112131415161718/ 18

Bekijk gratis de handleiding van Workzone AB1600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd