Workzone AB1600 handleiding
Handleiding
Je bekijkt pagina 12 van 18
16
AFTER SALES SUPPORT
support@scheppach.com.au
1300 855 831
MODEL: AB1600 PRODUCT CODE: 53670 08/2017
AUS
Operation/Technical data AB1600
The pointed chisel is used mainly for general chiseling and the demolition of mason-
ry, concrete and loose rock. It is particularly well suited to breaking and loosening.
The at chisel is used for general chiseling, demolition and the breaking of masonry,
concrete and loose stone. With its selective breaking action the at chisel is used for
the removal of protruding concrete and masonry or for the removal residual mortar.
m Important!
To avoid the risk of electric shock, the machine must only be held using the two
handles (1/3). You may suffer an electric shock if you chisel into electrical cables or
power supplies.
Switching on and off (Fig. 4)
To switch on:
Press the control switch (2).
To switch off:
Release the control switch (2).
Practical tips
Sharpening chisel accessories
You will only achieve good results if you use sharp chisels. You should therefore
sharpen the chisels promptly to ensure that they produce good results and provide a
long service life. Sharpen the chisels with an angle grinder.
m Important!
You only require slight contact pressure for chiseling. Excessive contact pressure
will place an unnecessary strain on the motor. Check the chisels at regular intervals.
Sharpen or replace blunt chisels.
VIII. TECHNICAL DATA
Dimensions L x W x H mm 652 x 157 x 276
Blowing force Joule 50
Vibration level m/s² 18.2
Weight kg 16
Input Voltage V~ 230 - 240
Frequency Hz 50
Power input W 1600
Protection class II
Subject to technical modications!
Bekijk gratis de handleiding van Workzone AB1600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Workzone |
| Model | AB1600 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2847 MB |