Workzone AB1600 handleiding

18 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 18
AFTER SALES SUPPORT
15
1300 855 831
support@scheppach.com.au
MODEL: AB1600 PRODUCT CODE: 53670 08/2017
AUS
AB1600 Before starting equipment/Operation
VI. BEFORE STARTING THE EQUIPMENT
Before you connect the equipment to the mains supply make sure that the data on
the rating plate are identical to the mains data.
Always pull the power plug before making adjustments to the equipment.
Check the oil level before using the machine. Place the machine on the oor with the
tool mounting pointing downwards. The oil must be at least 3 mm above the bottom
edge of the inspection window (6). (Fig. 5)
Check the drilling point for concealed electrical cables, gas and water pipes using a
cable/pipe detector.
Auxiliary handle (Fig. 2 / Item 3)
For safety reasons you must only use the demolition hammer with the Auxiliary
handle. The Auxiliary handle (3) enables you to achieve better stability whilst using
the demolition hammer. The Auxiliary handle (3) can be turned into any required
position. Undo the screw (a) by turning it in the “+” direction. Now turn the Auxiliary
handle (3) into the most comfortable working position for yourself and then tighten
the screw (a) again by turning it in the “-” direction.
Inserting the accessory (Fig. 3)
Clean the accessory before tting it and apply a thin coating of grease to the
accessory shaft.
Pull out the locking bolt (4) as far as possible, turn it through 180° and release it.
Insert the accessory into the tool mounting (5) and push it in as far as possible.
(see Fig. 3)
Pull out the locking bolt (4) again, turn it through 180° in the opposite direction
and release it.
Check the lock by pulling the accessory.
Removing the accessory
To remove the accessory, proceed in reverse order.
VII. OPER ATION
This demolition hammer is designed for use in the breaking of hard surfaces - con-
crete and masonry and for the loosening of impacted dirt and soil. Its powerful motor
and attachments ensure the quick and easy removal of material

Bekijk gratis de handleiding van Workzone AB1600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkWorkzone
ModelAB1600
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2847 MB