Handleiding
Je bekijkt pagina 13 van 27
4. Remove screws out of door hinges to separate
door.
5.
Remove inner door panel mounting screws and
separate from door.
Fig. 37
6. Remove hinges.
7. Reverse procedure to install.
DOOR STOP
Shut off the gas before servicing the
unit and follow lockout / tagout
procedures.
1. Remove OVEN DOOR.
2. Tie string or flexible wire around pin or roller (1,
Fig. 38).
NOTE: Holding onto string/wire while removing stop
will secure it from failing down into oven cavity.
Fig. 38
3. Remove stop bracket from oven frame (2, Fig.
38).
4. Slide stop bracket down cavity channel and out
through opening (3, Fig. 38).
5. Tie string or flexible wire around pin or roller on
new bracket to assist installation up through
cavity channel.
6. Align oven frame and stop bracket mounting
holes and install screws.
7. Reverse procedure to install.
8. Verify door operation.
GAS PRESSURE REGULATOR
Shut off the gas before servicing the
unit and follow lockout / tagout
procedures.
1. Access gas pressure regulator on back of range.
2. Remove regulator access cap.
WX RANGE - 2. REMOVAL AND REPLACEMENT PARTS
Page 13 of 27 F45992 (1123)
Bekijk gratis de handleiding van Wolf WX36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wolf |
| Model | WX36 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 11749 MB |
