Handleiding
Je bekijkt pagina 7 van 28
wolfappliance.com | 7
Installation
Preparation
Before moving the range, protect any finished flooring
and secure the oven door closed to prevent damage.
Oven Door Removal
To lighten the load or to fit through a doorway, the oven
door can be removed. Remove only if necessary. Door
removal should be done only by a certified installer or
service technician. Do not lift or carry the oven door by
the door handle.
To remove, open the door completely. Rotate both hinge
locks forward to the open position, remove the screw
closest to the hinge on both sides of the door, and pull
the door forward.
To reinstall, slide the door onto the hinges. Rotate the
hinge locks back completely and install the screws.
Placement
The range has rear casters which allow for easy
movement by lifting the front of the unit. Do not lift or
carry the range by the oven door handle.
Use an appliance dolly to move the range near the
opening. Place the appliance dolly on the side or back to
prevent damage. Remove and recycle packing materials.
Do not discard the anti-tip bracket supplied with the
range.
Leveling
Raise the range to its desired height by adjusting the front
legs and rear casters. Use a
3
/
4
" socket to adjust the rear
casters. The front legs can be adjusted by rotating the leg
clockwise to raise and counterclockwise to lower.
IMPORTANT NOTE: For 48" models, equally distribute
the load to all three front legs and rear casters.
Bekijk gratis de handleiding van Wolf IR48751, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wolf |
| Model | IR48751 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2599 MB |
