Witt Smart Touch Air Pump handleiding
Handleiding
Je bekijkt pagina 53 van 64
53
ENEN
5.4 Change unit
Short press the unit switch key (m), you can switch the air pressure display unit.
The unit conversion formula is shown below:
1PSI = 6.89KPA 1BAR = 100KPA 1Kg/cm
2
= 98KPA
5.5 Pre-set air pressure value
Briefly press the +/- button (p): adjust the pre-set air pressure value +/- 0.5 PSI
Hold down the +/- button (p): Quick adjustment of pre-set air pressure value
Please note: The settings button (0) and the pre-set button for air pressure will
both be automatically saved by the software. You just need to change the air
pump setting so that the air pressure is automatically set for the relevant setting.
5.6 Attaching the hose: see the illustration below.
Warm!
Connector for Schrader valve Connector for
Dunlop and
Presta valves
Connector for balls
5.7 Start inflation
Briefly press the pump button (on/off) to start pumping. The digital display for
real-time air pressure (f) will change while pumping. There will be noise when
pumping, and the hose will also heat up to high temperatures when working with
it for a long time.
Avoid extended contact with the hose and the connector port for the hose (b).
Bekijk gratis de handleiding van Witt Smart Touch Air Pump, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Witt |
| Model | Smart Touch Air Pump |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4557 MB |
