Handleiding
Je bekijkt pagina 27 van 59
27
BRUG OG PROGRAMMERING AF DET DIGITALE UR PÅ TOUCHSKÆRM
MINUS
INDTILLINGSTAST
PLUS
Det digitale ur gør det muligt at programmere ovnen til automatisk at tænde og slukke.
Dette kontrolpanel fungerer som en touchskærm; hold fingerspidserne på tasten i et par sekunder
for at aktivere.
TÆND FØRSTE GANG OG INDSTIL TIDEN
Ved første tænding af apparatet eller efter strømafbrydelse, vil ordet ”AUTO” blinke på
displayet. Tryk på tasten, så det ikke længere blinker, og brug tasterne for at indstille tiden
(hold tasterne inde for hurtigt at scrolle gennem tiden).
For at justere tiden under normal drift, dvs. når uret allerede er tændt, skal du trykke på begge
taster samtidig i mindst to sekunder, og derefter indstille tiden som beskrevet ovenfor.
MANUEL BRUG
Denne funktion er til brug af ovnen uden nogen programmering.
Det er altid muligt at skifte fra en programmeret funktion til manuel funktion ved at trykke på tasten
vælg ”Manuel” hvis der ikke skal anvendes nogen tilberedningsprogrammer.
PROGRAMMERING AF TIMEREN
Denne funktion aktiverer en lydalarm efter et forudindstillet tidsrum, uden at det påvirker ovnens drift.
Det digitale ur kan også bruges som timer:
• Tryk på tasten i mindst 2 sekunder for at komme til programmeringsmenuen; det blinkende
symbol vises.
• Brug
Instructions for the user
28
USING AND PROGRAMMING THE DIGITAL CLOCK ON TOUCH SCREEN OVENS
The digital clock enables the oven to be se
t to automatically switch on and off.
DE
CREASE KEY
MODE KEY
INCREASE KEY
This programmer works like a touch screen; rest the tip of the finger on the key for a few seconds
to activate it.
IN
ITIAL POWER-ON AND SETTING THE TIME
When first powering on the appliance or following a power failure, and the word AUTO flash
on the display. Touch the “Mode” key to stop the flashing and use the
/ keys to set the time
(hold down the / keys to scroll rapidly).
To adjust the time under normal operating conditions, i.e. when the clock is already on, touch both
keys / simultaneously for at least two seconds and then set the time as described previously.
MANUAL USE
This function is for using the oven without any programming.
It is
always possible to switch from a programmed function to “Manuale” (Manual) function, by
touching the “Mode” key; choose “Manuale” if no cooking programmes are to be used.
PROGRAMMING THE TIMER
This function activates an audible alarm after a preset time, without interfering with the
operati
on of the oven.
The digital clock can also be used as a time
r:
• t
ouch the “Mode” key for at least 2 seconds to enter the programming menu; the flashing
symbol will appear;
• use the / keys to set the required time and the display will show the time remaining.
The timer starts automatically and the symbol will stop flashing. When the set time is reached,
an audible alarm sounds for 7 minutes and the symbol will flash;
• touch any key to stop the alarm or the “Mode” key to delete the programme.
knapperne til at indstille den ønskede tid, og displayet viser den resterende tid.
Timeren starter automatisk, og symbolet stopper med at blinke. Når den indstillede tid er nået,
lyder en alarm i 7 minutter, og symbolet blinker.
• Tryk på en hvilken som helst knap for at stoppe alarmen eller tryk på for at slette programmet.
Brugsanvisning
Instructions for the user
28
USING AND PROGRAMMING THE DIGITAL CLOCK ON TOUCH SCREEN OVENS
The digital clock enables the oven to be se
t to automatically switch on and off.
DECREASE KEY
MODE KEY
INCREASE KEY
This programmer works like a touch screen; rest the tip of the finger on the key for a few seconds
to activate it.
IN
ITIAL POWER-ON AND SETTING THE TIME
When first powering on the appliance or following a power failure,
and the word AUTO flash
on the display. Touch the “Mode” key to stop the flashing and use the
/ keys to set the time
(hold down the / keys to scroll rapidly).
To adjust the time under normal operating conditions, i.e. when the clock is already on, touch both
keys / simultaneously for at least two seconds and then set the time as described previously.
MANUAL USE
This function is for using the oven without any programming.
It is
always possible to switch from a programmed function to “Manuale” (Manual) function, by
touching the “Mode” key; choose “Manuale” if no cooking programmes are to be used.
PROGRAMMING THE TIMER
This function activates an audible alarm after a preset time, without interfering with the
operati
on of the oven.
The digital clock can also be used as a time
r:
• t
ouch the “Mode” key for at least 2 seconds to enter the programming menu; the flashing
symbol will appear;
• use the / keys to set the required time and the display will show the time remaining.
The timer starts automatically and the symbol will stop flashing. When the set time is reached,
an audible alarm sounds for 7 minutes and the symbol will flash;
• touch any key to stop the alarm or the “Mode” key to delete the programme.
Instructions for the user
28
USING AND PROGRAMMING THE DIGITAL CLOCK ON TOUCH SCREEN OVENS
The digital clock enables the oven to be se
t to automatically switch on and off.
DE
CREASE KEY
MODE KEY
INCREASE KEY
This programmer works like a touch screen; rest the tip of the finger on the key for a few seconds
to activate it.
IN
ITIAL POWER-ON AND SETTING THE TIME
When first powering on the appliance or following a power failure,
and the word AUTO flash
on the display. Touch the “Mode” key to stop the flashing and use the
/ keys to set the time
(hold down the / keys to scroll rapidly).
To adjust the time under normal operating conditions, i.e. when the clock is already on, touch both
keys / simultaneously for at least two seconds and then set the time as described previously.
MANUAL USE
This function is for using the oven without any programming.
It is
always possible to switch from a programmed function to “Manuale” (Manual) function, by
touching the “Mode” key; choose “Manuale” if no cooking programmes are to be used.
PROGRAMMING THE TIMER
This function activates an audible alarm after a preset time, without interfering with the
operati
on of the oven.
The digital clock can also be used as a time
r:
• t
ouch the “Mode” key for at least 2 seconds to enter the programming menu; the flashing
symbol will appear;
• use the / keys to set the required time and the display will show the time remaining.
The timer starts automatically and the symbol will stop flashing. When the set time is reached,
an audible alarm sounds for 7 minutes and the symbol will flash;
• touch any key to stop the alarm or the “Mode” key to delete the programme.
Instructions for the user
28
USING AND PROGRAMMING THE DIGITAL CLOCK ON TOUCH SCREEN OVENS
The digital clock enables the oven to be se
t to automatically switch on and off.
DE
CREASE KEY
MODE KEY
INCREASE KEY
This programmer works like a touch screen; rest the tip of the finger on the key for a few seconds
to activate it.
IN
ITIAL POWER-ON AND SETTING THE TIME
When first powering on the appliance or following a power failure, and the word AUTO flash
on the display. Touch the “Mode” key to stop the flashing and use the
/ keys to set the time
(hold down the / keys to scroll rapidly).
To adjust the time under normal operating conditions, i.e. when the clock is already on, touch both
keys / simultaneously for at least two seconds and then set the time as described previously.
MANUAL USE
This function is for using the oven without any programming.
It is
always possible to switch from a programmed function to “Manuale” (Manual) function, by
touching the “Mode” key; choose “Manuale” if no cooking programmes are to be used.
PROGRAMMING THE TIMER
This function activates an audible alarm after a preset time, without interfering with the
operati
on of the oven.
The digital clock can also be used as a time
r:
• t
ouch the “Mode” key for at least 2 seconds to enter the programming menu; the flashing
symbol will appear;
• use the / keys to set the required time and the display will show the time remaining.
The timer starts automatically and the symbol will stop flashing. When the set time is reached,
an audible alarm sounds for 7 minutes and the symbol will flash;
• touch any key to stop the alarm or the “Mode” key to delete the programme.
Instructions for the user
28
USING AND PROGRAMMING THE DIGITAL CLOCK ON TOUCH SCREEN OVENS
The digital clock enables the oven to be se
t to automatically switch on and off.
DE
CREASE KEY
MODE KEY
INCREASE KEY
This programmer works like a touch screen; rest the tip of the finger on the key for a few seconds
to activate it.
IN
ITIAL POWER-ON AND SETTING THE TIME
When first powering on the appliance or following a power failure, and the word AUTO flash
on the display. Touch the “Mode” key to stop the flashing and use
ys to set the time
(hold down the / keys to scroll rapidly).
To adjust the time under normal operating conditions, i.e. when the clock is already on, touch both
keys / simultaneously for at least two seconds and then set the time as described previously.
MANUAL USE
This function is for using the oven without any programming.
It is always possible to switch from a programmed function to “Manuale” (Manual) function, by
touching the “Mode” key; choose “Manuale” if no cooking programmes are to be used.
PROGRAMMING THE TIMER
This function activates an audible alarm after a preset time, without interfering with the
operation of the oven.
The digital clock can also be used as a timer:
• touch the “Mode” key for at least 2 seconds to enter the programming menu; the flashing
symbol will appear;
• use the / keys to set the required time and the display will show the time remaining.
The timer starts automatically and the symbol will stop flashing. When the set time is reached,
an audible alarm sounds for 7 minutes and the symbol will flash;
• touch any key to stop the alarm or the “Mode” key to delete the programme.
Instructions for the user
28
USING AND PROGRAMMING THE DIGITAL CLOCK ON TOUCH SCREEN OVENS
The digital clock enables the oven to be se
t to automatically switch on and off.
DE
CREASE KEY
MODE KEY
INCREASE KEY
This programmer works like a touch screen; rest the tip of the finger on the key for a few seconds
to activate it.
IN
ITIAL POWER-ON AND SETTING THE TIME
When first powering on the appliance or following a power failure, and the word AUTO flash
on the display. Touch the “Mode” key to stop the flashing and use the
/ keys to set the time
(hold down the / keys to scroll rapidly).
To adjust the time under normal operating conditions, i.e. when the clock is already on, touch both
keys / simultaneously for at least two seconds and then set the time as described previously.
MANUAL USE
This function is for using the oven without any programming.
It is
always possible to switch from a programmed function to “Manuale” (Manual) function, by
touching the “Mode” key; choose “Manuale” if no cooking programmes are to be used.
PROGRAMMING THE TIMER
This function activates an audible alarm after a preset time, without interfering with the
operati
on of the oven.
The digital clock can also be used as a time
r:
• t
ouch the “Mode” key for at least 2 seconds to enter the programming menu; the flashing
symbol will appear;
• use the / keys to set the required time and the display will show the time remaining.
The timer starts automatically and the symbol will stop flashing. When the set time is reached,
an audible alarm sounds for 7 minutes and the symbol will flash;
• touch any key to stop the alarm or the “Mode” key to delete the programme.
Bekijk gratis de handleiding van Witt Embrace 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Witt |
| Model | Embrace 90 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 8313 MB |
