Handleiding
Je bekijkt pagina 29 van 68
29
EN
3
NOTE
The letter "H" on the display indicates which cooking zone is too hot to touch. The letter "H" disappears when the surface has
cooled to a safe temperature. If you want to heat another pan immediately after using the cooking zone, you can place it on the
still warm cooking zone to save energy.
4.4.3. USING THE STOP AND START FUNCTION
1. Press the stop and start button to activate the function.
The display shows ||.
2. Press the stop and start button to cancel the function.
The cooking zone returns to the previously set position.
3
NOTE
Make sure the cooking zone is switched on before using this function.
4.4.4. USING THE BOOSTER FUNCTION
The booster button can set a cooking zone to the maximum power.
1. Press the control button of a cooking zone of your choice.
2. Press and hold the booster button for 3 seconds.
The booster is switched on. The cooking zone heats up. The display shows the letter P.
After five minutes, the booster function switches off. The cooking zone continues to heat at the highest power setting.
You can also turn off the booster function before the booster has expired:
3. Press the control button of the cooking zone with the booster.
4. Press the power level button to turn off the booster. The cooking zone continues heating at the power level that you have
pressed.
5. Swipe the power setting control adjust the power.
4.4.5. SETTING THE COOKING TIMER
1. Select a cooking zone.
2. Press - or + under TIMER.
The number 30 flashes on the display.
3. Set the cooking timer in one of the following two ways:
A. Press - or + to increase or decrease the time by 1 minute.
B. Press and hold - or + to increase or decrease the time by 10 minutes.
When the cooking timer is activated, the display shows the remaining time and flashes for 5 seconds.
When the time is up, the cooking timer switches off and the display shows --.
3
NOTE
Press - to cancel the cooking timer. The display shows 00 and then --.
4.4.6. SETTING THE TIMER
1. Press - or + under TIMER.
The number 30 flashes on the display.
2. Set the timer in one of the following two ways:
A. Press - or + to increase or decrease the time by 1 minute.
B. Press and hold - or + to increase or decrease the time by 10 minutes.
When the timer is set, the display shows the remaining time and flashes for 5 seconds.
When the time is up, the buzzer will beep for 30 seconds and the timer switches off automatically.
The timer time can be set between 0 and 99 minutes.
When multiple timers are used, the display shows the time of the timer that expires first.
Press the control button of a cooking zone to see the remaining time of the timer.
3
NOTE
Press - to cancel the timer. The display shows 00 and then --.
Bekijk gratis de handleiding van Wisberg WBBC4F1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wisberg |
| Model | WBBC4F1 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5389 MB |
