Wilson Raptor On-Wall handleiding
Handleiding
Je bekijkt pagina 4 van 72
4
EN
Troubleshooting
If you encounter issues with your audio setup, follow these troubleshooting steps to address common
problems:
Check Connections: Ensure all cables are securely connected to your speakers, amplifier, and audio
source.
Verify Source: Confirm that the audio source (e.g., CD player, smartphone) is functioning and sending
a signal.
Inspect Speaker Wires: Examine speaker wires for damage and ensure correct connections to terminals.
Balance and Volume: Set amplifier or receiver balance and volume to appropriate levels.
Swap Speakers: Swap left and right speakers to identify if the issue is with a specific speaker.
Test Different Channels: If available, test each amplifier channel to rule out channel-specific problems.
Amplifier Status: Check if the amplifier is in "protect" mode or muted due to shorted speaker cables.
Ensure only one speaker is connected to each output terminal on the amplifier.
Physical Inspection: Inspect speakers for physical damage to drivers (woofers, tweeters).
Eliminate Interference: Ensure no nearby electronic devices are causing interference that might affect
audio quality.
Refer to Manuals: Consult the user manuals for both your speakers and amplifier or AV-receiver for
specific troubleshooting guidance and detailed instructions.
By following these troubleshooting steps and referring to the user manuals, you can resolve common
audio issues and enjoy optimal sound quality.
Safety Instructions
WARNING – read before connection and use.
By following these safety instructions, you can ensure the safe and proper use of your passive
loudspeakers in compliance with CE and other safety regulations.
Store this Instruction Manual: Please store this instruction manual for future reference.
Power Source and Mains Outlet: Do not plug the loudspeakers into a power source or mains outlet. Doing
so could result in electric shock or fire. Passive loudspeakers do not require a direct power connection.
Output Terminals: Only connect one loudspeaker to each amplifier output terminal to prevent damage
to both the speakers and the amplifier, and to avoid overheating.
Avoid Water and Moisture: Do not use this product near water or moisture. Keep the loudspeakers in a dry
environment to prevent electrical hazards and damage.
Prevent Fire Risk: To prevent the risk of fire, ensure that liquids and objects do not enter the product. This
includes avoiding spillage of liquids on or near the loudspeakers.
Ventilation and Port Openings: Do not block any ventilation and port openings on the loudspeakers.
Adequate ventilation and airflow is necessary to prevent overheating and maintain optimal performance.
Heat Sources: Do not install the loudspeakers near heat sources, such as radiators, heat registers, stoves,
or other appliances that produce heat. Maintaining a safe distance from heat sources is essential to
prevent damage.
Volume Control: Avoid excessive volume levels that may lead to distortion or overheating. High volumes
can trigger protection mechanisms, cutting off the output to protect the speakers and the amplifier.
Mounting Safety: If you are wall or ceiling mounting speakers, ensure the use of proper screws and fittings
for secure installation, considering the weight of the loudspeakers, to prevent accidents. Servicing: If the
loudspeakers have been damaged, servicing is required. Do not attempt to service the product yourself, as
this may lead to safety hazards. Contact the manufacturer to be referred to an authorized service center
near you.
Bekijk gratis de handleiding van Wilson Raptor On-Wall, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wilson |
| Model | Raptor On-Wall |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5704 MB |
