Wilson Raptor On-Wall handleiding
Handleiding
Je bekijkt pagina 3 van 72
3
EN
Connecting the loudspeakers
We recommend that you read the manual of your stereo amplifier or AV-receiver carefully before
connecting your loudspeakers. All connections should be made with the amplifier switched off.
Choose a cable of suitable length and diameter for each loudspeaker - a loudspeaker cable is
polarized, with twin cores of different colors, or with a rib or printed text on the insulation.
Split the twin cores insulation to a depth of about 50-60mm. Strip the insulation from each end,
leaving about 15mm of bare wire - twist wire to gather any loose strands.
Ensure that positive terminals on the speakers (marked + and colored red) are connected to the
positive output terminal on the amplifier and that negative terminals on the speakers
(marked – and colored black) are connected to the negative output terminal on the amplifier.
Incorrect connection can result in poor audio imaging and loss of bass response.
Keeping the loudspeaker cables away from AC outlets will reduce interference.
WARNING: Do not plug into a power source and mains outlet, this could result in electric shock
or fire.
Right Loudspeaker
Receiver or Amplituner
Left Loudspeaker
Fig. 3
Running-in period
We recommend a running-in time of your new loudspeakers of approximately 15-20 hours at normal
listening level before you decide on the final positioning, during the running-in time the driveunits will
settle in and perform as intended.
Maintenance
WILSON loudspeakers are finished using high quality material. Cleaning the loudspeakers should be
done with a damp cloth. Chemical cleaners should be avoided, as they may damage the finish.
Avoid touching the drive units, and do not use the loudspeakers as a flower, coffee or drinks table
(risk of water or liquids being spilled into the loudspeaker).
Wilson RAPTOR ON-WALL loudspeakers require no regular maintenance.
Bekijk gratis de handleiding van Wilson Raptor On-Wall, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wilson |
| Model | Raptor On-Wall |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5704 MB |
