Wiesenfield WIE-CCD-200 handleiding
Handleiding
Je bekijkt pagina 44 van 198
Remove used batteries from the unit in the same way you put them in.
Return the batteries to a unit responsible for their disposal.
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this appliance
are recyclable according to their marking. By reuse, recycling or applying other
forms of use of waste machines, you make a significant contribution to the
protection of our environment.
Your local administration will provide you with information about the appropriate
disposal point for used appliances.
TROUBLESHOOTING:
Error
code
Display
message
Reason
Solution
Error
01
Motor Error!
1. Engine failure
Return to the manufacturer's service
centre for repair
2. Counting sensor
failure
Return to the manufacturer's service
centre for repair
Error
02
Line On Teeth!
1. The cable is
wound around the
sprocket
Open the panel. Press and hold the
"↓" or "↑" button for a few seconds
to rotate the cable drum. Once you
have found the correct position,
untangle the cable from the sprocket.
Press the "MENU" button to clear the
error. The door will perform a
functional test and then return to
normal operation.
2. Wrong cable
winding direction
Press the "↓" button and pull the
cable until it is fully unwound and
then it will wound in the correct
direction. When the cable is
shortened to the desired length,
release the button. Use the "↑" or
"↓" buttons to adjust the length.
After making the adjustments, press
the "MENU" button to clear the error.
The door will perform a functional
test and return to normal operation.
Error
03
Door Is Not
Tied
1. The door is not
tied
Tie the door. Wait 8 seconds, the
door will perform a functional test
and then resume normal operation.
Bekijk gratis de handleiding van Wiesenfield WIE-CCD-200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-CCD-200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24809 MB |
