Handleiding
Je bekijkt pagina 23 van 56
23
Ice and Water
PROBLEM POSSIBLE CAUSES SOLUTIONS
The ice maker is not
producing ice or is not
producing enough ice
The refrigerator is not connected to a
water supply or the water supply shut-
off valve is not turned on
Connect refrigerator to water supply and turn water
shut-off valve fully open.
There is a kink in the water source line A kink in the line can reduce water ow. Straighten the
water source line.
The ice maker is not turned on Make sure the ice maker is ON. See “Ice Maker.”
The refrigerator has just been installed Wait 24 hours after ice maker installation for ice
production to begin. Wait 3 days for full ice production.
The refrigerator door is not closed
completely
Close the door rmly. If it does not close completely,
see “The doors will not close completely.”
A large amount of ice was recently
removed
Allow 24 hours for ice maker to produce more ice.
An ice cube is jammed in the ice maker
ejector arm
Remove ice from the ejector arm with a plastic utensil.
NOTE: On some models, press the lever which opens
the ice maker door to access the ejector arm.
A water lter is installed on the
refrigerator
Remove the water lter and operate the ice maker. If
ice volume improves, then the lter may be clogged or
incorrectly installed. Replace lter or reinstall it correctly.
A reverse osmosis water ltration
system is connected to your cold
water supply
This can decrease water pressure. See “Water Supply
Requirements.”
The ice cubes are
hollow or small
NOTE: This is an indication
of low water pressure.
The water shut-off valve
is not fully open
Turn the water shut-off valve fully open.
There is a kink in the water source line A kink in the line can reduce water ow. Straighten the
water source line.
A water lter is installed on the
refrigerator
Remove lter and operate ice maker. If ice quality
improves, then the lter may be clogged or incorrectly
installed. Replace lter or reinstall it correctly.
A reverse osmosis water ltration
system is connected to your cold water
supply
This can decrease water pressure. See “Water Supply
Requirements.”
Questions remain regarding water
pressure
Call a licensed, qualied plumber.
Off-taste, odor or gray color
in the ice or water
Recently installed or replaced
plumbing connections (New plumbing
connections can cause discolored or
off-avored ice and water.)
Discard the ice and wash the ice storage bin. Flush the
water system with 4 gal. (15 L) of water. Allow 24 hours
for the ice maker to make new ice, and discard the
rst 3 batches of ice produced.
The ice has been stored too long Discard ice. Wash ice storage bin. Allow 24 hours for ice
maker to make new ice.
The water has been stored too long Dispense at least 1 qt (1 L) of water per week to
maintain a fresh supply.
Odor from stored food has
transferred to the ice
Use airtight, moisture proof packaging to store food.
There are minerals (such as sulfur)
in the water
A water lter may need to be installed to remove
the minerals.
There is a water lter installed on the
refrigerator
Gray or dark discoloration in ice may indicate that the
water ltration system needs additional ushing. Flush
the water system after installing and before using a
new water lter. See “Water Dispenser” for water lter
ushing instructions.
The water lter needs to be replaced Replace the disposable water lter at least every
6 months or when indicated. See “Water Filtration
System.”
Bekijk gratis de handleiding van Whirlpool WRF560SFHW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WRF560SFHW |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 7778 MB |
