Handleiding
Je bekijkt pagina 6 van 26
during cooking.
Access special functions
and turn the knob to select
from menu. then press to conrm.
Press
to start immediately the cleaning cycle, or
press
to set the end time/start delayed.
The oven will start the cleaning cycle and the door will
be locked automatically.
The oven door cannot be opened while pyrolytic
cleaning is in progress: It will remain locked until the
temperature has returned to an acceptable level. Air the
room during and after running the Pyro cycle.
Please note: The duration and temperature of cleaning
cycle cannot be set.
. USING THE MEAT PROBE (IF PRESENT)
The meat probe supplied allows to measure the exact
internal temperature of food during cooking. The
meat probe is allowed only in some cooking function
(Conventional, Forced Air, Convention Bake, Turbo Grill,
6th Sense Meat).
It is very important to position the
probe accurately in order to obtain
perfect cooking results. Insert the
probe fully into the eshiest part of
the meat, avoiding bones and fatty
parts. For poultry, the probe should
be inserted sideways, in the middle
of the breast, taking care to ensure
the tip does not end up in a hollow
part. In the case of meat with very
irregular thickness, check it is cooked
properly before removing it from the oven. Connect the
end of the probe in the hole located on the right wall of
the oven cavity.
When the meat probe is plugged to the oven cavity, a
buzzer sounds and the display shows icon and target
temperature. If the meat probe is plugged during the
selection of a function, display switches to the default
meat probe target temperature.
Press to start settings. Turn the knob to set the meat
probe target temperature. Press
to conrm.
Press or to conrm and start the cooking cycle.
During cooking cycle, the display shows meat probe
target temperature. When the meat reaches the target
temperature set, the cooking cycle stops and the display
shows “End”. To restart the cooking cycle from “End”,
by turning the knob it is possible to adjust meat probe
target temperature as indicated above. Press
or
to conrm and restart the cooking cycle.
Please note: during cooking cycle with meat probe it
is possible turn the knob to change meat probe target
temperature. Press to adjust oven cavity temperature.
The meat probe can be inserted at any time, also during a
cooking cycle. In this case, it is necessary re-set the cooking
function parameters.
If meat probe is incompatible with a function, the oven
switch o the cooking cycle and plays an alert buzzer
sound. In this case, disconnect the meat probe or press to
set another function. Start delayed and preheat phase are
not compatible with meat probe.
. KEYLOCK
To lock the keypad, press and hold for at least ve
seconds.
Do this again to unlock the keypad.
Please note: This function can also be activated during
cooking. For safety reasons, the oven can be switched o at
any time by pressing
.
. NOTES
• Do not cover the inside of the oven with aluminium
foil.
• Never drag pots or pans across the bottom of the
oven as this could damage the enamel coating.
• Do not place heavy weights on the door and do not
hold on to the door.
• Due to the higher temperature of the Pizza cycle it
is expected to experience slightly higher cooling fan
noise.
Bekijk gratis de handleiding van Whirlpool WOI4IS8PPM0SXA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WOI4IS8PPM0SXA |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 3863 MB |
